MÁY MÀI ĐAI ĐÔI LOẠI ZBSKuhlmeyer
ZBS 3Ex
MÁY MÀI ĐAI ĐÔI LOẠI ZBS
Kuhlmeyer
ZBS 3Ex
EXW giá cố định chưa bao gồm thuế GTGT
139.000 €
năm sản xuất
2022
Tình trạng
máy trưng bày
Vị trí
Piaseczno 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- MÁY MÀI ĐAI ĐÔI LOẠI ZBS
- nhà sản xuất:
- Kuhlmeyer
- Mô hình:
- ZBS 3Ex
- Số máy:
- 23 03 28 / 1
- năm sản xuất:
- 2022
- Tình trạng:
- gần như mới (máy trưng bày)
- tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW giá cố định chưa bao gồm thuế GTGT
139.000 €
- Vị trí:
- Mazurska, 18, 05-500 Piaseczno, PL

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A16565521
- cập nhật:
- lần cuối vào ngày 29.07.2025
Mô tả
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
Ndodpst Hvkvjfx Adlec
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
for manual grinding, satin finishing and polishing
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
Ndodpst Hvkvjfx Adlec
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2019
Gửi yêu cầu
Điện thoại & Fax
+48 22 42... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi










