Máy cắt tia nướcSunrise Waterjet
SQ6020
Máy cắt tia nước
Sunrise Waterjet
SQ6020
VB chưa bao gồm thuế GTGT
79.500 €
năm sản xuất
2018
Tình trạng
Đã qua sử dụng
Vị trí
Sambreville 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Máy cắt tia nước
- nhà sản xuất:
- Sunrise Waterjet
- Mô hình:
- SQ6020
- năm sản xuất:
- 2018
- Tình trạng:
- tốt (đã qua sử dụng)
- tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 1.200 h
Giá & Vị trí
VB chưa bao gồm thuế GTGT
79.500 €
- Vị trí:
- Sambreville, Bỉ
Gọi điện
Chi tiết kỹ thuật
- Khoảng cách di chuyển trục X:
- 6.000 mm
- Khoảng cách di chuyển trục Y:
- 2.000 mm
- Khoảng cách di chuyển trục Z:
- 150 mm
- Chiều dài bàn:
- 6.000 mm
- Áp suất làm việc:
- 4.500 thanh
Chi tiết về đề nghị
- ID tin đăng:
- A19537906
- cập nhật:
- lần cuối vào ngày 02.10.2025
Mô tả
Sunrise Waterjet Cutting SQ6020
Dcedjwyi Uwjpfx Aa Sjn
Fully custom-built model to specification.
High-pressure intensifier pump CUX-400H, rated pressure 4,500 bar.
Cutting table 6,000 x 2,000 mm over 3 axes.
Pneumatic sludge extractor.
Abrasive silo.
The machine is from December 2018 and was commissioned in February 2019.
It is in perfect working condition.
This machine cuts absolutely all materials (except tempered glass).
Steel cutting capacity over 100 mm thickness.
(Cuts stainless steel, aluminum, copper, bronze, stone, tiles, glass, composites, etc.)
To fully refurbish, the following is required: cleaning of the cutting tank (approx. €2,800), replacement of the vanes (requires 2 sheets of 3mm 304 stainless steel), and maintenance of the HP pump (approx. €1,500).
Dismantling and transport are at the buyer’s expense.
Sale due to health issues.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Dcedjwyi Uwjpfx Aa Sjn
Fully custom-built model to specification.
High-pressure intensifier pump CUX-400H, rated pressure 4,500 bar.
Cutting table 6,000 x 2,000 mm over 3 axes.
Pneumatic sludge extractor.
Abrasive silo.
The machine is from December 2018 and was commissioned in February 2019.
It is in perfect working condition.
This machine cuts absolutely all materials (except tempered glass).
Steel cutting capacity over 100 mm thickness.
(Cuts stainless steel, aluminum, copper, bronze, stone, tiles, glass, composites, etc.)
To fully refurbish, the following is required: cleaning of the cutting tank (approx. €2,800), replacement of the vanes (requires 2 sheets of 3mm 304 stainless steel), and maintenance of the HP pump (approx. €1,500).
Dismantling and transport are at the buyer’s expense.
Sale due to health issues.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2025
Gửi yêu cầu
Điện thoại & Fax
+32 477 8... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi