Máy mài tròn

Studer S30

Country of manufacture: Switzerland
Voltage: 380/50/3
Net weight: 3100 kg
Overall dimensions: 230x155x170 cm
Installed power: 13 kVA
Customs tariff position: 8460.2920

TECHNICAL SPECIFICATIONS

MAIN DIMENSIONS
Distance between centers: 650 mm
Grinding capacity SpW+bs: -80
Stroke: 700

LONGITUDINAL SLIDE
Max stroke: SpW+50 mm
Minimum automatic feed: 1.5 mm
Speed: 50-5500 mm/min
Reversal delay: 0-6 sec
Maximum table swivel: 12°/10°/8.5°/6°
Pneumatic relief for table and workhead

CROSS SLIDE
Max stroke: 300 mm
Rapid traverse: 60 mm
Plunge grinding depth in diameter: 3.4 mm
Feed 1: 0.012-6 mm/min
Feed 2: 0.012-1.2 mm/min
Feed per pulse: 0.001-0.05 mm

GRINDING WHEEL HEADSTOCK
Left-side wheel, external grinding: 400x80x127 mm
Drive power: 5.5 kW
Peripheral speed: 35 m/s
RPM: 1670/2110 min-1
Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW

WORKHEAD
Swivel range: 0-90°
Continuously variable RPM: 30-1000 min-1
Internal taper: Morse 5
Collets: W-25
Drive power: 0.55 kW
Lasdpfow T Sd Tox Afnoh
Maximum workpiece weight between centers: 130 kg
Grinding load between centers: 100 Nm

TAILSTOCK
Internal taper: Morse 3
Quill stroke: 35 mm
Fine adjustment for cylindricity correction: ± 40 μm

TECHNICAL CHARACTERISTICS:

GUARANTEED WORKING ACCURACY
Straightness of the generator over 630 mm: 0.003 mm
Roundness during chuck grinding: 0.0003 mm

CONNECTION VALUES
Maximum absorbed power: 13 kVA
Maximum permitted voltage fluctuation: -15%/+10%
Maximum permitted frequency variation: ± 3%
Required compressed air pressure: 5 bar

Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.