Bảng phân chia cưa

Scheer PA 4136

Panel Dividing Saw SCHEER PA 4136

We are offering a used panel saw for the dividing of wood-based materials. The machine will remain in operation until the end of September or can, by arrangement, be dismantled by the buyer until that time. At the beginning of October, the machine will be dismantled by us. In that case, the price will increase by the dismantling costs.

Operational Status: Fully functional

CE-compliant and dust-tested (limit value < 2 mg/m³)

Main Technical Data & Features:
- Longitudinal saw FM 20-3100 with hardened guides
- Automatic forward & return travel of the saw unit (return automatically lowered)
- Feed drive via three-phase gear motor, frequency inverter controlled
- Feed speed: 2 – 40 m/min (stepless)
- Rapid return speed: 50 m/min
- Extraction channels in the machine base & pressure beam
- Scoring saw adjustable from outside (without opening the hood)
- Guard locking with lamella curtain SZ 5008
- 3-stage cutting height adjustment LA 4143
- 6 recesses in the pressure beam for residual cuts up to 5 mm

Saw motor: 7.0 kW | Scorer motor: 1.1 kW (switchable)
Cutting length: 3100 mm | Cutting height: 70 mm

Material Handling & Feed:
Gsdpfew Tlvcjx Aczjbu
- Angle pressure device WP 5003 with pressure claw for cross-cuts
- Adjustment range: 2400 mm
- Fully automatic, controlled via DNC-AT
- Material feed table HP 5091
- 2 upper guides, rack and pinion guide
- Servo drive for material pusher
- Feed speed: 25 m/min (safety limited)
- Return: 40 m/min
- 6 clamping fingers, 4 double roller tracks
- Table length: 3100 mm | Fence depth: 3150 mm
- Closed Pertinax surface in the angle stop area

Operating system: MS DOS
Multifunction keyboard in swiveling control panel
Graphical display of cutting plans and sequences

Software / Programs:
- OPTIMAX: office optimization, waste calculation, material requirements
- OPTIMIN: direct optimization on the machine PC with parts list entry
- Processing via USB, floppy disk or online (optional)
- Manual, automatic & special operating modes (e.g., grooving, veneered parts)

Additional Equipment:
- Angle stop table HP 5085: 1,720 x 800 mm | Pertinax surface
- Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax surface
- Air cushion system LK 5030 integrated into both tables
- Circular saw blade KSB 4005: Ø 305 mm, Z = 60
- Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.