Máy chấn tôn

Placke HQPB M-6 150t x 3.100mm P790

The workhorse! A press brake for all applications!

The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet assembly, takes place in-house. By using state-of-the-art technology combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level.
Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, along with easy operation, allows us to meet the highest demands and precision in the bending process.

Press force: 1,500 kN (150 t)
Working length: 3,100 mm
Distance between uprights: 2,600 mm
Installation height: 450 mm
Overhang: 305 mm
Ram stroke: 265 mm
Height of lower ram above the floor: 850 mm
Rapid traverse max.: 200 mm/s
Pressing traverse max.: 9.8 mm/s
Return traverse max.: 150 mm/s
Ram positioning accuracy: ± 0.01 mm
Ram inclination: ± 10 mm (electrically limited to ± 5 mm)
Motor power: 15 kW
Hydraulic oil tank capacity: 290 l
Operating voltage: 400 V / 3 Ph / 50 Hz
Machine weight: approx. 12.5 t

Description:
> Machine body
Steel S 355 N, design based on FEM analysis
Side uprights with two pressure cylinders, above floor
2-component structural paint, RAL 7004 / 7016
> Hydraulics & Upper Tool
Proportional control valve, electronically monitored cylinder synchronization
Double upper ram guidance, Heidenhain scales
Separate Y1/Y2 control, inclination monitoring
> Tooling
Top: WILA hydraulic, NSCL-II-HC
Bottom: mechanical clamping for dies with pins (13 × 20 mm)
Guodpjz Hn D Eefx Ab Tsi
2 aluminum support arms at the front, approx. 600 mm, height-adjustable
> Power Crowning Slim
Segmented, mechatronic crowning system
Compensates for symmetrical deflection
Also compensates for deviations due to wear, sheet metal quality and off-center insertion
> Back gauge 4-axis
X-axis 1,100 mm, 400 mm/s, ± 0.01 mm
R-axis 200 mm, 200 mm/s, ± 0.01 mm
Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm
> Control Delem DA 66S
24″ touchscreen on a swivel arm
2D programming, 3D visualization
DXF import, tandem operation
> Safety & Efficiency
CE-compliant, Pilz safety PLC
TFS laser light curtain, rear light curtain
eco-MODE start-stop automatic
> Additional equipment
LED work area lighting in the rear
Remote diagnostics for Delem control and Pilz PLC
Automatic side upright compensation

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.