Máy phay giườngMTE
Kompakt Plus
Máy phay giường
MTE
Kompakt Plus
Năm sản xuất
2004
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Nordrhein-Westfalen 

Theo dõi đấu giá
Dữ liệu cơ bản
- Tên máy:
- Máy phay giường
- Nhà sản xuất:
- MTE
- Mô hình:
- Kompakt Plus
- Số máy:
- 04120594
- Năm sản xuất:
- 2004
- Tình trạng:
- sẵn sàng sử dụng (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 29.337 h
Chi tiết kỹ thuật
Trục chính
Tốc độ trục chính (tối đa):
12.000 vòng/phút
Thông số trục
Khoảng cách di chuyển trục X:
2.000 mm
Khoảng cách di chuyển trục Y:
895 mm
Khoảng cách di chuyển trục Z:
895 mm
Thông tin chi tiết
Mô hình bộ điều khiển:
Heidenhain iTNC 530
cung cấp
- Vị trí:
- Nordrhein-Westfalen, Đức
– Khoảng cách: khoảng 9.537 km
- Khả dụng:
- ngay sau khi kết thúc phiên đấu giá
- Điều kiện giao hàng:
- EXW
Chi phí tháo dỡ và bốc xếp:
Nhận hàng tại chỗ:
miễn phí
miễn phí
Chi phí vận chuyển:
Mô tả
TECHNICAL DETAILS
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
Hfjds Aknvwopfx Ab Top
The machine is still in productive use.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Table size: 2,200 × 750 mm
Travel range X-axis: approx. 2,000 mm
Travel range Y-axis: approx. 895 mm
Travel range Z-axis: approx. 895 mm
Spindle manufacturer: FAEMAT
Spindle type: FA 250 CUV
Spindle cooling: water-cooled
Tool holder: SK50
Spindle speed: max. 12,000 rpm
MACHINE DETAILS
Control system: Heidenhain iTNC 530
Operating hours
Last recorded program runtime: 29,337 h
Machine operating hours: 70,185 h
Control system operating hours: 132,104 h
EQUIPMENT
Automatic universal milling head
Tool changer
Complete enclosure
Separate cooling unit (year of manufacture 2020)
The spindle has been repaired by a specialist company in the past and subsequently tested. A corresponding test report and various repair and service documents are available upon request.
The machine has a known startup error in the X-axis that has existed for approximately ten years. When starting up, the error message “C380 – Motor X cannot be controlled” sometimes appears. To start the machine, it may be necessary to move the X-motor manually and repeat the startup process several times. Once the machine is running, it operates reliably and without any problems in processing mode, according to our long-standing experience.
Hfjds Aknvwopfx Ab Top
The machine is still in productive use.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Xử lý thanh toán
- Chi phí phát sinh khi mua hàng:
- 18 %
- Điều kiện thanh toán:
- 100 % thanh toán trước
- Phương thức thanh toán:
Chuyển khoản ngân hàng
Chi tiết về đề nghị
- ID tin đăng:
- A23342642
- Số tham chiếu:
- AUC-2611420
- Cập nhật:
- lần cuối vào ngày 16.11.2026
- Ưu đãi độc quyền:
- chỉ có sẵn tại đấu giá
tham quan
Có thể xem tại chỗ
Máy đang có điện
Machineseeker khuyến nghị nên kiểm tra máy móc trực tiếp trước.
Tất cả thông tin được cung cấp theo kiến thức và lương tâm tốt nhất – vui lòng xác minh trực tiếp tại chỗ.
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Dortmund
9.524 km
Máy phay giường CNC
MTEKompakt Plus
MTEKompakt Plus
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi























