Máy cắt plasmaMicrostep
Mastercut Eco Plus 3001.15
Máy cắt plasma
Microstep
Mastercut Eco Plus 3001.15
Năm sản xuất
2017
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Mahlstetten 

Dữ liệu cơ bản
- Tên máy:
- Máy cắt plasma
- Nhà sản xuất:
- Microstep
- Mô hình:
- Mastercut Eco Plus 3001.15
- Số máy:
- 2202
- Năm sản xuất:
- 2017
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Griesstrasse 4, 78601 Mahlstetten, Deutschland

Gọi điện
Chi tiết kỹ thuật
Chi tiết công suất
Điện áp đầu vào:
400 V
Dòng điện đầu vào:
50 A
Loại dòng điện đầu vào:
ba pha
Thông số trục
Khoảng cách di chuyển trục X:
3.000 mm
Khoảng cách di chuyển trục Y:
1.500 mm
Chi tiết về đề nghị
- ID tin đăng:
- A21860148
- Số tham chiếu:
- Microstep Mastercut Eco Plus 3001.15
- Cập nhật:
- lần cuối vào ngày 05.05.2026
Mô tả
Microstep Mastercut Eco Plus 3001.15
Year of manufacture: 2017
Control system: IMSNC
Oxy-fuel cutting table: 3000 x 1500 mm
Extraction duct left / right
Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A
Power source HiFocus 161i PLUS
• Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control with ultra-fast regulation of cutting current
• Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source
• Operating status and error display via LED and screen
• Analog and serial interfaces for adaptation to CNC controllers
• Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A
• Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise
• Adjustable current reduction for cornering, start, and end signals of the guidance system
• Automatic display of the preset cutting current
• Serial data transmission for PC-based diagnostics
Plasma cutting technology: Contour Cut
• Further development of HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cutting quality and contour accuracy
• Holes with angular deviations according to DIN EN ISO 9013 range 2-4
• Minimal angular deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No tedious post-processing – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment
Plasma torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long service life of consumables conserves resources
• Narrower kerf means fewer emissions and less waste
Hnsdpfjy Nd Hyjx Ab Tow
• Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip
• Lower noise levels due to reduced gas consumption
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking possible with the same consumables
Power source HiFocus 161i
Power supply: 400 V; 3 Ph; 50 Hz
Max. power input: 28 kVA (100% duty cycle)
Main fuse, slow-blow: 50 A
Protection class: IP22
Open circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range:
Max. 50 mm
Recommended: 0.5 – 38 mm
Max. piercing thickness: 30 mm
Weight: 206 kg
Plasma machine torch PerCut 200
Quick-change torch PerCut 210
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, Air, N2/H2 (F5)
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Year of manufacture: 2017
Control system: IMSNC
Oxy-fuel cutting table: 3000 x 1500 mm
Extraction duct left / right
Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A
Power source HiFocus 161i PLUS
• Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control with ultra-fast regulation of cutting current
• Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source
• Operating status and error display via LED and screen
• Analog and serial interfaces for adaptation to CNC controllers
• Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A
• Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise
• Adjustable current reduction for cornering, start, and end signals of the guidance system
• Automatic display of the preset cutting current
• Serial data transmission for PC-based diagnostics
Plasma cutting technology: Contour Cut
• Further development of HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cutting quality and contour accuracy
• Holes with angular deviations according to DIN EN ISO 9013 range 2-4
• Minimal angular deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No tedious post-processing – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment
Plasma torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long service life of consumables conserves resources
• Narrower kerf means fewer emissions and less waste
Hnsdpfjy Nd Hyjx Ab Tow
• Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip
• Lower noise levels due to reduced gas consumption
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking possible with the same consumables
Power source HiFocus 161i
Power supply: 400 V; 3 Ph; 50 Hz
Max. power input: 28 kVA (100% duty cycle)
Main fuse, slow-blow: 50 A
Protection class: IP22
Open circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range:
Max. 50 mm
Recommended: 0.5 – 38 mm
Max. piercing thickness: 30 mm
Weight: 206 kg
Plasma machine torch PerCut 200
Quick-change torch PerCut 210
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, Air, N2/H2 (F5)
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2020
2 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 7191 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Rödermark
9.485 km
Trường đại học Máy mài đai kim loại Radien
GRITGR 75-2H
GRITGR 75-2H
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Erwitte
9.466 km
Máy cắt kim loại ống nhỏ bằng laser
High-speed Cutter for Small TubesG16 3kW - 6kW
High-speed Cutter for Small TubesG16 3kW - 6kW
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Áo
9.040 km
Máy cắt tia nước
Stein-Moser GmbHCNC 5 Achsen 4020 x 2020 x 600 mm
Stein-Moser GmbHCNC 5 Achsen 4020 x 2020 x 600 mm
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Lübbecke
9.425 km
Máy cắt laser
TrumpfTruLaser 3040
TrumpfTruLaser 3040
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Rödermark
9.485 km
Thiết bị hàn khí trơ MIG-MAG
EurotronicK 5500 W
EurotronicK 5500 W
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Werlte
9.472 km
Máy tiện CNC
OkumaMULTUS B300II-W
OkumaMULTUS B300II-W
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Grebenau
9.417 km
Máy ép chìm thủy lực
SACK & KIESSELBACHEP 1250
SACK & KIESSELBACHEP 1250
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Đức
9.541 km
Trung tâm gia công - ngang
MAZAKHCN 6000-II (+ HCN 6000)
MAZAKHCN 6000-II (+ HCN 6000)
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Đức
9.202 km
Máy cắt laser
BYSTRONICBYAutonom 3015 - 6000W
BYSTRONICBYAutonom 3015 - 6000W
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Rödermark
9.485 km
Trường đại học Máy mài đai kim loại Radien
ALMIAL 100 U
ALMIAL 100 U
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi























































































