Máy chà nhám băng rộng
HOUFEK SPB 1350 BULDOG 7

Năm sản xuất
2020
Tình trạng
Đã qua sử dụng (hoạt động hoàn toàn)
Vị trí
Sachsen Đức
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
Máy chà nhám băng rộng HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7
HOUFEK SPB 1350 BULDOG 7

Dữ liệu cơ bản

Tên máy:
Máy chà nhám băng rộng
Nhà sản xuất:
HOUFEK
Mô hình:
SPB 1350 BULDOG 7
Năm sản xuất:
2020
Tình trạng:
sẵn sàng sử dụng (đã qua sử dụng)
Tính năng hoạt động:
hoạt động hoàn toàn

Chi tiết kỹ thuật

Vật liệu/sản phẩm có thể gia công

Chiều cao phôi (tối đa):
160 mm

Thông tin chi tiết

Chiều dài dây đai mài:
1.370 mm
Chiều rộng dây đai mài:
2.620 mm

cung cấp

Vị trí:
Sachsen, Đức Đức – Khoảng cách: khoảng 9.203 km
Khả dụng:
ngay sau khi kết thúc phiên đấu giá
Điều kiện giao hàng:
EXW
Chi phí tháo dỡ và bốc xếp:
Nhận hàng tại chỗ:
miễn phí
Chi phí vận chuyển:

Mô tả

TECHNICAL DETAILS


Sanding units
Working roller, 1st unit: Steel roller, Ø 200 mm
Working roller, 2nd unit: Rubber roller, Ø 200 mm, 45 Sh
Sanding belt dimensions: 1,370 × 2,620 mm
Sanding belts: 1 per sanding unit
Sanding unit motor power: 2 × 15 kW (20 hp)
Sanding belt speed: 3–18 m/s, frequency-controlled


PS30E segmented sanding pad
Segment width: 30 mm
Edge segment adjustment: ±1–3 segments
Pressure adjustment: 0.5–2.5 bar, manual
Sanding pad construction: 0.5 mm steel plate, rubber, felt and graphite


Table and feed
Table height: 900 mm
Table design: Fixed table with movable sanding unit
Workpiece height: 3–160 mm
Feed belt speed: 3–15 m/min, frequency-controlled
Infeed table extension: 300 mm
Outfeed table extension: 300 mm


Control system
Control system: NC machine control with 10.1" B&R touchscreen


Workpiece cleaning module
Cleaning brush: Rotating, nylon, Ø 100 mm
Motor power: 1.5 kW (2 hp)
Dust extraction connection: Ø 180 mm


Electrical connection
Voltage: 400 V
Frequency: 50 Hz


EQUIPMENT
Automatic star-delta motor starting
Motorised lifting of the sanding units
Pneumatic lifting of the sanding rollers on the 1st and 2nd units, operated via the front control panel
Ammeter for measuring the current drawn by the sanding unit
Sanding belt oscillation control with optoelectronic infrared sensor
Automatic feed belt centring
Workpiece height positioner
Synchronisation of lowering and lifting with the feed belt
Automatic table positioning to preset positions
Digital display of feed belt speed
Two-zone intermittent blow-off device with oscillating nozzles for cleaning the sanding belt
Rubber-coated pressure rollers
Emergency stop with pneumatic disc brake on the main motor
Mechanical limitation of maximum stock removal
Sound insulation
Vacuum table
Vacuum pump with sound insulation
Workpiece cleaning module at the machine outfeed, outside the machine
Design compliant with CE electrical and safety standards

Note: No warranty is given for accessories. The item is sold “as seen”. Prospective buyers must verify the completeness of the item on site. 



Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.

Xử lý thanh toán

Chi phí phát sinh khi mua hàng:
18 %
Điều kiện thanh toán:
100 % thanh toán trước
Phương thức thanh toán:
Vorkasse Überweisung IconChuyển khoản ngân hàng
Hóa đơn được phát hành với số tiền của giá thầu cao nhất, cộng với các chi phí tháo dỡ/bốc xếp và vận chuyển nếu có, cùng các chi phí mua hàng phát sinh và thuế VAT theo quy định.

Chi tiết về đề nghị

ID tin đăng:
A23342243
Số tham chiếu:
AUC-2611413
Cập nhật:
lần cuối vào ngày 16.11.2026
Ưu đãi độc quyền:
chỉ có sẵn tại đấu giá

Liên hệ

Luca Miethe
Người liên hệ: Luca Miethe
ID máy móc: 23342243
Điện thoại: +49 201 857 861 77
SiegelSiegel

Bảo vệ người mua Machineseeker

Thanh toán an toàn qua tài khoản ký quỹ
Người bán được kiểm tra nghiêm ngặt
Hỗ trợ cá nhân và đa ngôn ngữ
Việc chi trả giá mua chỉ được thực hiện sau khi bàn giao hàng hóa.

tham quan

Có thể xem tại chỗ
Máy đang có điện
Machineseeker khuyến nghị nên kiểm tra máy móc trực tiếp trước.
Tất cả thông tin được cung cấp theo kiến thức và lương tâm tốt nhất – vui lòng xác minh trực tiếp tại chỗ.

Nhà cung cấp

Trustseal
Người bán chuyên nghiệp thương mại
Từ 2016 tại Machineseeker
Sachsen Đức Đức
Khoảng cách: khoảng 9.115 km

Máy móc của bạn có thể đặt tại đây

Đấu giá với số 1

Bạn bán hàng chỉ trong vài tuần!
Bạn bán với giá cao nhất!
Bạn bán hàng mà không cần chi phí cố định và rủi ro!
hoặc gọi điện +49 201 857 861 10
Thảo luận hợp tác

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.