Máy cưa panelGiben
PRISMA EVO SP
Máy cưa panel
Giben
PRISMA EVO SP
EXW VB chưa bao gồm thuế GTGT
25.000 €
Năm sản xuất
2018
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Vranov nad Topľou 

Thông tin về máy móc
- Tên máy:
- Máy cưa panel
- Nhà sản xuất:
- Giben
- Mô hình:
- PRISMA EVO SP
- Năm sản xuất:
- 2018
- Tình trạng:
- tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW VB chưa bao gồm thuế GTGT
25.000 €
- Vị trí:
- Čemernianska 137, 093 03 Vranov nad Topľou, Slovensko

Gọi điện
Chi tiết kỹ thuật
- Công suất:
- 7,5 kW (10,20 mã lực)
- Điện áp đầu vào:
- 400 V
- Tần số đầu vào:
- 50 Hz
- Đường kính lưỡi cưa:
- 380 mm
- Thiết bị:
- tài liệu / sổ tay hướng dẫn
Chi tiết về đề nghị
- ID tin đăng:
- A21950658
- Cập nhật:
- lần cuối vào ngày 19.05.2026
Mô tả
Number of clamps: 6
Kdjdey S Rhcspfx Ah Ajl
Cutting length: 3800 mm
Max. saw blade overhang: 90 mm
Air tables: 4x
Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others.
PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life.
PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard.
The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Kdjdey S Rhcspfx Ah Ajl
Cutting length: 3800 mm
Max. saw blade overhang: 90 mm
Air tables: 4x
Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others.
PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life.
PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard.
The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2026
1 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+421 903 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








