Máy nắn tôn DIMECODimeco 1675 BV 300mm 2.5-3mm
straightening machine
Máy nắn tôn DIMECO
Dimeco 1675 BV 300mm 2.5-3mm
straightening machine
Giá cố định chưa bao gồm thuế GTGT
5.750 €
Năm sản xuất
1986
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Tata 

Dữ liệu cơ bản
- Tên máy:
- Máy nắn tôn DIMECO
- Nhà sản xuất:
- Dimeco 1675 BV 300mm 2.5-3mm
- Mô hình:
- straightening machine
- Năm sản xuất:
- 1986
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
Giá cố định chưa bao gồm thuế GTGT
5.750 €
- Vị trí:
- Tata, 2890 Hungary

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
500 kg
Chi tiết công suất
Tần số đầu vào:
50 Hz
Loại dòng điện đầu vào:
ba pha
Vật liệu/sản phẩm có thể gia công
Chiều rộng sản phẩm (tối đa):
300 mm
Độ dày tấm (tối đa):
3 mm
Chi tiết về đề nghị
- ID tin đăng:
- A23343014
- Số tham chiếu:
- ct2500a
- Cập nhật:
- lần cuối vào ngày 16.11.2026
Mô tả
Industrial sheet metal straightener, Dimeco 1675 BV (often referred to as a 1675/BV straightening machine or strip straightener).
Hfedpfj Akn Shex Ab Tep
Manufacturer: DIMECO
Model: 1675BV
Year of manufacture: 1986
Maximum strip width: 300 mm.
Sheet thickness: 0.6–2.5 mm across the full width (300 mm); up to 3.0–3.5 mm for narrower strips.
Straightening rollers: 7 hardened, ground rollers with a diameter of 60 mm.
Infeed and outfeed rollers: 4 rollers (2 at the entry, 2 at the exit), also with a diameter of 60 mm.
Drive: 1.1 kW electric motor with stepless speed control.
Dimensions and weight: Approximately 975 × 775 × 1460 mm (length × width × height); weight ranges between 420 and 500 kg, depending on the specific configuration.
• Roller adjustment: The upper straightening rollers can be adjusted independently; the adjustment depth can be read from dial indicators to ensure precise flattening.
• Strip guidance: On the entry side, two adjustable, hardened vertical guide rollers and two hold-down rollers keep the material aligned.
• Loop control: For continuous operation with presses... For material supply, the machine operates in conjunction with a loop control system that regulates the feed speed based on the amount of material sag.
Hfedpfj Akn Shex Ab Tep
Manufacturer: DIMECO
Model: 1675BV
Year of manufacture: 1986
Maximum strip width: 300 mm.
Sheet thickness: 0.6–2.5 mm across the full width (300 mm); up to 3.0–3.5 mm for narrower strips.
Straightening rollers: 7 hardened, ground rollers with a diameter of 60 mm.
Infeed and outfeed rollers: 4 rollers (2 at the entry, 2 at the exit), also with a diameter of 60 mm.
Drive: 1.1 kW electric motor with stepless speed control.
Dimensions and weight: Approximately 975 × 775 × 1460 mm (length × width × height); weight ranges between 420 and 500 kg, depending on the specific configuration.
• Roller adjustment: The upper straightening rollers can be adjusted independently; the adjustment depth can be read from dial indicators to ensure precise flattening.
• Strip guidance: On the entry side, two adjustable, hardened vertical guide rollers and two hold-down rollers keep the material aligned.
• Loop control: For continuous operation with presses... For material supply, the machine operates in conjunction with a loop control system that regulates the feed speed based on the amount of material sag.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2013
294 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+36 34 81... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi




















