Hệ thống gócWeinig
Unicontrol 12
Hệ thống góc
Weinig
Unicontrol 12
EXW VB chưa bao gồm thuế GTGT
109.000 €
Năm sản xuất
2011
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Rattelsdorf 

Dữ liệu cơ bản
- Tên máy:
- Hệ thống góc
- Nhà sản xuất:
- Weinig
- Mô hình:
- Unicontrol 12
- Năm sản xuất:
- 2011
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW VB chưa bao gồm thuế GTGT
109.000 €
- Vị trí:
- Gewerbegebiet, Im Flecken 1, 96179 Rattelsdorf, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A17107197
- Cập nhật:
- lần cuối vào ngày 17.11.2026
Mô tả
Unicontrol 12
Consisting of: Cut-off unit (item A),
Tenon and slotted spindle (item C),
Transfer belt (Pos. I),
profiling spindle (Pos L),
profiling spindle (Pos. N),
Profile shaving unit vertical right (Pos. P)
For the production of individual parts and elements in frame-by-frame or serial production.
Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt.
Working width 40-140mm
(See pressure ruler left 40 - 140 mm)
Working height 40-120mm
Workpiece length min.
approx. 275 mm + 1 x end profile length
Long machining:
approx. 220 mm + 2 x end profile length
Workpiece length max. 3500 mm
The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings.
Cross machining:
Table feed Motor power 0.3 kW (0.4 HP)
Pre-set feed speed for cutting, profiling and return 3-25 m/min
Vario table with (studio window production possible)
The clamping length of all tenoning and slotting spindles can be used without a tool blank.
Workpiece clamping by means of a clamping bridge.
Operated by a clamping cylinder installed under the table.
NC-controlled long fence mounted on the slotting table.
Studio window device Swivel angle max. +/- 75°
The minimum workpiece length for slanted windows depends on the angle and the width of the wood.
Possible part dimensions for slanted window production
Angle Max. Min.
Working width Workpiece length
+/-75° 80 mm 800 mm
+/-70° 120 mm 490 mm
+/-60° 240 mm 360 mm
+/-90° 350 mm 185 mm
For angles greater than 60° only counter processing
Commission not documented
1)NC automatic angle adjustment for machining angled parts
Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining
Knodpfxjumci Se Adhjd
2) Additional counter-rails
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Consisting of: Cut-off unit (item A),
Tenon and slotted spindle (item C),
Transfer belt (Pos. I),
profiling spindle (Pos L),
profiling spindle (Pos. N),
Profile shaving unit vertical right (Pos. P)
For the production of individual parts and elements in frame-by-frame or serial production.
Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt.
Working width 40-140mm
(See pressure ruler left 40 - 140 mm)
Working height 40-120mm
Workpiece length min.
approx. 275 mm + 1 x end profile length
Long machining:
approx. 220 mm + 2 x end profile length
Workpiece length max. 3500 mm
The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings.
Cross machining:
Table feed Motor power 0.3 kW (0.4 HP)
Pre-set feed speed for cutting, profiling and return 3-25 m/min
Vario table with (studio window production possible)
The clamping length of all tenoning and slotting spindles can be used without a tool blank.
Workpiece clamping by means of a clamping bridge.
Operated by a clamping cylinder installed under the table.
NC-controlled long fence mounted on the slotting table.
Studio window device Swivel angle max. +/- 75°
The minimum workpiece length for slanted windows depends on the angle and the width of the wood.
Possible part dimensions for slanted window production
Angle Max. Min.
Working width Workpiece length
+/-75° 80 mm 800 mm
+/-70° 120 mm 490 mm
+/-60° 240 mm 360 mm
+/-90° 350 mm 185 mm
For angles greater than 60° only counter processing
Commission not documented
1)NC automatic angle adjustment for machining angled parts
Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining
Knodpfxjumci Se Adhjd
2) Additional counter-rails
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2020
50 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 911 9... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Borken
9.559 km
Máy gia công góc CNC tự động hoàn toàn Weining Unicontrol 12, dây chuyền sản xuất cửa sổ
WeinigUnicontrol 12
WeinigUnicontrol 12
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Wioska
8.924 km
Dây chuyền sản xuất cửa sổ WEINIG
WEINIGUnirex 3000, Unitex 15, Univar 15
WEINIGUnirex 3000, Unitex 15, Univar 15
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Oberkochen
9.432 km
Hệ thống cửa sổ
WEINIGUnicontrol 12 NC
WEINIGUnicontrol 12 NC
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Oberkochen
9.432 km
Hệ thống cửa sổ
WEINIGUnicontrol 12 NC
WEINIGUnicontrol 12 NC
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Rīga
8.357 km
Xe đẩy để vận chuyển khung và khung
COMALLCARR 600 - 85/9 Q
COMALLCARR 600 - 85/9 Q
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Kežmarok
8.685 km
Đầu phay bộ cửa sổ 110mm
LEUTWoodAlu 110
LEUTWoodAlu 110
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Rosmalen
9.656 km
Máy tạo hình
WEINIGCUBE
WEINIGCUBE
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Aalen
9.429 km
Máy ép kính và điều khiển
RUCHSERRU-SW3-90°
RUCHSERRU-SW3-90°
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Ý
9.442 km
Trung tâm gia công cho cửa
BIESSEWINLINE 2Y 1650
BIESSEWINLINE 2Y 1650
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Stühlingen
9.586 km
Máy tạo hình
SCMsuperset nt
SCMsuperset nt
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi













































































































