Hệ thống cửa sổ

WEINIG Unicontrol 11 NC,Univar 6, WKZ

Tenoning spindle 1 St.
Number of milling agregates 5 St.
Spindle diameter 50 mm
Control Weinig PC-Nexus
Weinig Unicontrol 11 NC window production system with an extensive set of tooling
-----
INCLUDES:
- Weinig Univar 6 rebating/profiling machine
- Tooling for both the Unicontrol 11 and Univar 6

The machines can be viewed in operation until the end of calendar week 46, 2026. Dismantling and loading must take place during calendar week 47, 2026.
(Note: If the buyer is unable to collect the equipment during week 47, temporary storage at our facility can be arranged.)

OPTIONAL (for an additional charge):
Professional dismantling and loading of the machines onto the customer's trucks: 4,500.00 EUR

Manufacturer's technical specifications:
-----

Item 1: Weinig Unicontrol 11 window production system (built 2007)
-----
Includes existing tooling for:
- IV 67 (timber and timber-aluminum)
- IV 77 (timber and timber-aluminum)
- IV 90 (timber)

Cross-cut saw:
-----
Equipped with a laser alignment light; motor power 3 kW; spindle diameter 40 mm;
spindle speed electronically adjustable (3,000–6,000 rpm) with integrated brake. Maximum tool cutting circle: 400 mm
Axial adjustment: 150 mm via NC axis
Predpfx Abo Afzv Sjkec
Radial adjustment: pneumatic, with 8 positions for top-side edge rounding

Horizontal rounding unit (bottom):
-----
Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm,
rotational speed 9,000 rpm
Maximum tool cutting circle: 130 mm
Axial adjustment: mechanically coupled to the cross-cut saw
Radial adjustment: pneumatically controlled

Tenoning and slotting spindle:
-----
Includes hydraulically clamped outboard bearing
Motor power (with brake): 15 kW
Spindle diameter: 50 mm
Spindle speed: 2,800 rpm
Maximum tool cutting circle: 400 mm
Tool clamping length: 640 mm
Axial adjustment: via NC axis
Base position (below table): 5–10 mm
Radial adjustment: fixed

1st profiling spindle (climb and conventional milling):
-----
Motor power (with brake): 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Tool cutting circle: min. 140 mm, max. 232 mm
Tool clamping length: 400 mm (with outboard bearing)
Axial adjustment: 350 mm via NC axis
Radial adjustment: via NC axis
Base position (below table): 5–10 mm
2 feed rollers opposite the spindle; axial position pneumatically controlled (8 positions)

Horizontal profiling unit (top):
-----
Motor power (with brake): 3.7 kW
Spindle diameter: 40 mm
Clamping length: 40 mm
Spindle speed 9,000 rpm
Maximum tool cutting circle: 130 mm
Pneumatic adjustment to 8 positions (axial and radial)

2nd Profile Spindle:
-----
Motor power: 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Tool cutting circle: min. 140 mm, max. 232 mm
Tool clamping length: 400 mm (with outboard bearing)
Axial adjustment range: 350 mm (NC-controlled axis)
Radial adjustment range: NC-controlled axis
Base position (below table): 5–10 mm
Cyclic guide fence with support rail for muntins/ba...