Máy tiện trục chính / thức ăn chăn nuôiVÖEST
DA 180
Máy tiện trục chính / thức ăn chăn nuôi
VÖEST
DA 180
giá cố định chưa bao gồm thuế GTGT
9.500 €
Tình trạng
Đã qua sử dụng
Vị trí
Haiger 

Hình ảnh cho thấy
Hiển thị bản đồ
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
9.500 €
- Vị trí:
- Hüttenstr 66-68, 35708 Haiger, DE
Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20343550
- cập nhật:
- lần cuối vào ngày 21.10.2025
Mô tả
Voest DA 180
Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition
The machine comes from the training workshop of a renowned German mechanical engineering company.
Technical Data:
VOEST ALPINE Lathe
Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981
Swing over bed: 380 mm
Swing over cross slide: 185 mm
Turning length: 1,000 mm
Centre height: 180 mm
Bed width: 330 mm
Spindle bore: 52 mm
Tailstock taper: MK 4
Coolant system
Motor: 380 Volt, 5.5 kW
12 spindle speeds: 44 - 2,000 rpm
66 longitudinal feeds: 0.072 - 4.038 mm/rev
66 cross feeds: 0.036 - 2.019 mm/rev
66 metric threads: 0.5 - 28 mm
66 inch threads: 1 - 32 TPI
66 module threads: 0.25 - 14
66 DP threads: 2 - 112
3-jaw chuck
Weight approx. 1,200 kg
Accessories and Equipment:
1 piece Röhm 3-jaw chuck 200 mm
Multifix size B
Digital readout
About the Machine:
We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.
You can find further drilling machines from reputable manufacturers on our website.
Knedpfexp I D Tox Aczec
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition
The machine comes from the training workshop of a renowned German mechanical engineering company.
Technical Data:
VOEST ALPINE Lathe
Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981
Swing over bed: 380 mm
Swing over cross slide: 185 mm
Turning length: 1,000 mm
Centre height: 180 mm
Bed width: 330 mm
Spindle bore: 52 mm
Tailstock taper: MK 4
Coolant system
Motor: 380 Volt, 5.5 kW
12 spindle speeds: 44 - 2,000 rpm
66 longitudinal feeds: 0.072 - 4.038 mm/rev
66 cross feeds: 0.036 - 2.019 mm/rev
66 metric threads: 0.5 - 28 mm
66 inch threads: 1 - 32 TPI
66 module threads: 0.25 - 14
66 DP threads: 2 - 112
3-jaw chuck
Weight approx. 1,200 kg
Accessories and Equipment:
1 piece Röhm 3-jaw chuck 200 mm
Multifix size B
Digital readout
About the Machine:
We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself.
You can find further drilling machines from reputable manufacturers on our website.
Knedpfexp I D Tox Aczec
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2019
Gửi yêu cầu
Điện thoại & Fax
+49 2773 ... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
quảng cáo nhỏ

9.339 km
Máy tiện tâm và máy tiện trục chính
Voest-AlpineDA180/0,8
Voest-AlpineDA180/0,8
quảng cáo nhỏ

9.149 km
Máy tiện trục chính / thức ăn chăn nuôi
VoestDA 180
VoestDA 180
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi