Máy chấn tônTRUMPF
TrumaBend V 500
Máy chấn tôn
TRUMPF
TrumaBend V 500
Năm sản xuất
2006
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Günzburg 

Thông tin về máy móc
- Tên máy:
- Máy chấn tôn
- Nhà sản xuất:
- TRUMPF
- Mô hình:
- TrumaBend V 500
- Năm sản xuất:
- 2006
- Tình trạng:
- tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- Augsburger Str. 56, 89312 Günzburg, Deutschland

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A22541102
- Số tham chiếu:
- 4021288
- Cập nhật:
- lần cuối vào ngày 12.08.2026
Mô tả
Press force: 50 t
Bending length: 1275 mm
Frame width: 1040 mm
Stroke: 215 mm
Usable installation height: 385 mm
Overhang: 420 mm
Standard equipment:
- Robust machine frame as a welded construction in all-steel design
- Press beam with high bending strength
- Electro-hydraulic upper drive via proportional valves
- Modern block hydraulics
- CNC back gauge with rack and pinion drive for the X and R axes
- Safe shifting of the gauge fingers from the front
- Upper tool clamping system "New Standard Clamping II" manual
- Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions)
- Control system TRUMPF TASC 6000
- Safety device consisting of side and rear protective doors
- Control cabinet air conditioning
- Network compatible
Optional equipment:
- 2 additional gauge fingers, attachable
- Upper tool clamping hydraulic
- Bendguard
- Roll protection cover at the rear
- Support console
Gedpfx Aozt R Hreicsbr
- Preparation for ACB
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Bending length: 1275 mm
Frame width: 1040 mm
Stroke: 215 mm
Usable installation height: 385 mm
Overhang: 420 mm
Standard equipment:
- Robust machine frame as a welded construction in all-steel design
- Press beam with high bending strength
- Electro-hydraulic upper drive via proportional valves
- Modern block hydraulics
- CNC back gauge with rack and pinion drive for the X and R axes
- Safe shifting of the gauge fingers from the front
- Upper tool clamping system "New Standard Clamping II" manual
- Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions)
- Control system TRUMPF TASC 6000
- Safety device consisting of side and rear protective doors
- Control cabinet air conditioning
- Network compatible
Optional equipment:
- 2 additional gauge fingers, attachable
- Upper tool clamping hydraulic
- Bendguard
- Roll protection cover at the rear
- Support console
Gedpfx Aozt R Hreicsbr
- Preparation for ACB
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Gửi yêu cầu
Điện thoại & Fax
+49 8221 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi



















