Máy cắt góc Tigerstop TIGERSTOP UKA 600 (2015)

TIGERSTOP UKA 600

- Feed rate: maximum 40 m/min
- Motor power: 5.5 Kw
- Working length: 7.35 meters

Miter saw
Manufacturer: Tigerstop
Type: UKA 600
Year of manufacture: 2015
Tiger UKA 600 miter cutting system consisting of:
Tiger Stop 7.5 automatic feed and stopper
Ibjdpfx Aijzuyx Hoija
Overall length: 7.95 meters
Working length: 7.35 meters
Net working length (automatic saw): 6 meters
Voltage: 220 volts 50 Hz
Motor power: 0.45 Kw
Feed rate: maximum 40 m/min (depending on the load)
Accuracy: +/- 0.4 mm as a sliding guide.
Infeed table for TigerStop 6.8
Overall length: 7.4 meters
Table width: 325 mm
Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device
Saw unit mounted on a rotary table with diameter: 980 mm
Diameter of the saw blade: 600 mm
Cutting capacity: 165 x 240 mm at 90 degrees
Maximum cutting height: 165 mm at the fence and 175 mm diameter
(at 90 degrees) for round material
Cutting angle: 30 - 90 - 30 degrees
45 - 90 - 45 degrees with automatic function
Motor power: 5.5 Kw
Voltage: 400 volts 50 Hz
Working height: 920 mm
The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive.
Outfeed/infeed table with side protection
Length: 3.7 meters
Width: 325 mm
PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file.
Extension with 6-strand flipper loading device
For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table.
Loading device consisting of:
6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m.
1 additional support strand without flipper on the outside of the loader
2 extra cylinder set for the loading device
Complete electrical control cabinet with PLC, power supply,
Emergency stop safety relay, complete wiring etc.
(Including additional electrical wiring for the safety fence door)
Label printer package for Beamworks
Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock
And additional protective device on the front to prevent intrusion between the loading strands.
Product length measurement with sensor in the protective cover, controlled by the Tigerstop control.
The length measurement and download with Tigerlink only work with 90-degree cuts.
Tigerlink download software for downloading a csv file (cutting list).

Note:
The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.