SCHAUBLIN 102Mi W25

SCHAUBLIN 102Mi W25

Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details.

• Headstock: Integrated motor
• Mounting: Mounted on workbench (Version CE)
• Cross-slide: Crank cross-slide with digital measurement device
• Tailstock: Morse Taper 2

Additional equipment

• Workbench: 2000 x 800 x 900 mm
• Lista drawer cabinet: 564 x 725 x 850 mm
• Pneumatic clamping device W25 with graphite distributor
• Tripan-111S quick-change tool holder system
• Boring bar holder, 30° angled, max Ø12 mm
Bodpfsy Snmvsx Aiceli
• 3-jaw chuck W25/Ø100 (cast iron, manual)
• Tailstock accessory: Rotating center 60°, Ø18 mm (Gepy)
• Collet set W25 (0.5–25 mm, 50 pieces)
• Mebiflex 70 lamp
• Max. Permissible Diameter Over Bed: 200 mm
• Max. Permissible Diameter Over Carriage (Cross Slide): 120 mm (60 mm with rear support)
• Center Height Over Bed: 102 mm
• Center Height Over Carriage: 20 mm
• Max. Center Distance: 470 mm
• Bed Length: 1,000 mm
• Bed Height: 168 mm
• Main Spindle Drive: AC Motor, 1.5 kW (Continuous operation)
• Spindle Type Options: W20 / W25
• Spindle Speed (Infinitely Variable): 100 - 6,000 rpm (min⁻¹)
• Spindle Internal Diameter: 20 mm (W20) / 25 mm (W25)
• Max. Bar Capacity: 14.5 mm (W20) / 19 mm (W25)
• Carriage Travel (Manual) on Bed: 442 mm
• Cross Travel (X-axis): 100 mm
• X-axis Resolution (Radius): 0.001 mm (digital)
• Longitudinal Travel (Z-axis): 90 mm (Optional: 150 mm for orientable upper slide)
• Z-axis Resolution: 0.001 mm (digital)
• Trapezoidal Screw Spindle: Ø 9 x 2 mm pitch
• Max. Tool Shank Cross-Section: 16 x 16 mm (Multifix-System) / 12 x 12 mm (Tripan-System)
• Tool Holder Diameter: 20 mm (Multifix-System) / 12 mm (Tripan-System)
• Standard Tailstock: Morse 2 internal taper, 30 mm spindle outer diameter, 80 mm stroke
• Lever-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 100 mm stroke
• Starwheel-operated Tailstock (Optional): W20/W25 internal taper, 40 mm spindle outer diameter, 150 mm stroke
• Quick-clamping Lever System (Optional): Max spindle speed 3,000 rpm
• Pneumatic Clamping System (Optional): Adjustable axial clamping force, 500 daN at 5 bar, Max spindle speed 6,000 rpm
• Spindle Lock: Pneumatically operated spindle lock, locking torque 48 Nm at 5 bar (Max speed 3,000 rpm)
• Steady Rests (Optional): Clearance, stationary steady rest, Ø 0.01 to 40 mm
• Electrical Connection: 400V, 50/60 Hz, Nominal Current 12A (Max 20A input fuse), +/- 5% allowable voltage fluctuations
• Power Consumption: 1.8 kVA
• Noise Level under Load at Operator Station: < 60 dBA
• Operating Temperature: +15°C to +30°C (+5°C to +40°C for digital measuring devices)
• Relative Humidity: 5% to 80%
• Digital Measuring Unit Battery: 1x Lithium 3V, Type CR 2032 (Current consumption: 45 µA, Lifespan: 5,000 hours continuous operation)
• Floor Loading: 263 kg/m²
• Floor Payload Capacity: 113 kg/m²

Technical Specification
Counter Spindle No
Driven Tools No