Máy chấnSafan
Máy chấn
Safan
Năm sản xuất
2007
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Sosnowiec 

Giá & Vị trí
- Vị trí:
- ul. Kosynierów 34, 41-219 Sosnowiec, Polska

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
16.800 kg
Tổng chiều dài:
5.140 mm
Tổng chiều rộng:
1.900 mm
Tổng chiều cao:
2.950 mm
Khoảng cách giữa các giá đỡ:
4.200 mm
Chiều cao bàn:
1.050 mm
Chi tiết công suất
Điện áp đầu vào:
400 V
Tần số đầu vào:
50 Hz
Dòng điện đầu vào:
63 A
Thiết bị
Bộ điều khiển từ xa bằng chân
Tính năng an toàn
Dừng khẩn cấp
Rào chắn ánh sáng an toàn
Tài liệu và chứng nhận
Tài liệu / sổ tay hướng dẫn
Dấu CE
Gờ chặn sau
Gờ chặn sau:
1.000 mm
Khoảng hành trình của thước chặn sau trục R:
150 mm
Khoảng cách di chuyển của cữ chặn sau trục Z:
3.900 mm
Điều chỉnh thước chặn sau:
điều khiển CNC
Thông số trục
Khoảng cách di chuyển trục X:
1.000 mm
Thông tin chi tiết
Nhà sản xuất bộ điều khiển:
Lenze
Mô hình bộ điều khiển:
9300
Chiều rộng làm việc:
4.060 mm
Lực uốn (tối đa):
200 t
Chiều cao lắp đặt:
950 mm
Tốc độ vận hành:
90 mm/s
Chiều dài hành trình:
300 mm
Độ sâu họng:
1.000 mm
Loại điều khiển:
Điều khiển CNC
Loại kích hoạt:
điện
Chi tiết về đề nghị
- ID tin đăng:
- A20728172
- Cập nhật:
- lần cuối vào ngày 20.11.2026
Mô tả
E-Brake press brakes are innovative and highly efficient machines on the market, designed for sheet metal processing by a Dutch manufacturer. The precision of bending and reliability have been recognized by users in Poland and worldwide.
SAFAN (FinnPower) E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer.
Lenze motors and servo motors, controlled by long-life frequency inverters, allow for fast and reliable operation of the system for many thousands of operating hours.
Iedpox Ewnpofx Adhstp
Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force resulting from springs mounted on both sides of the machine.
Even when idle, the machine practically does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes.
We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes.
In addition, the electric drive is insensitive to temperature differences that may occur in production halls.
The machine performs excellently in both long and short production runs.
Safan E-Brake 200-4100 model 2007
- Capacity 200 tons
- Bending length 4060mm
- Safan TS controller
- Programming in 2D Easy 2D mode
- 13” color monitor
- Service panel on a movable arm
- Y1/Y2 axis controlled by CNC
Backgauge:
- X axis controlled by CNC
- R axis controlled by CNC
- Z1+Z2 axis controlled by CNC
- Upper tool adapter Wila NSCL I MC
- Lower tool adapter Safan OBS/3
- Lightguard safety system with the option of controlling the upper beam descent
- Work area lighting at the front and rear of the machine
- Electrical installation 3/N/PE 50 Hz 400/230 V
- Opening 590mm
- Distance between machine frames 4300mm
- Weight 16,800kg
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
SAFAN (FinnPower) E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer.
Lenze motors and servo motors, controlled by long-life frequency inverters, allow for fast and reliable operation of the system for many thousands of operating hours.
Iedpox Ewnpofx Adhstp
Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force resulting from springs mounted on both sides of the machine.
Even when idle, the machine practically does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes.
We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes.
In addition, the electric drive is insensitive to temperature differences that may occur in production halls.
The machine performs excellently in both long and short production runs.
Safan E-Brake 200-4100 model 2007
- Capacity 200 tons
- Bending length 4060mm
- Safan TS controller
- Programming in 2D Easy 2D mode
- 13” color monitor
- Service panel on a movable arm
- Y1/Y2 axis controlled by CNC
Backgauge:
- X axis controlled by CNC
- R axis controlled by CNC
- Z1+Z2 axis controlled by CNC
- Upper tool adapter Wila NSCL I MC
- Lower tool adapter Safan OBS/3
- Lightguard safety system with the option of controlling the upper beam descent
- Work area lighting at the front and rear of the machine
- Electrical installation 3/N/PE 50 Hz 400/230 V
- Opening 590mm
- Distance between machine frames 4300mm
- Weight 16,800kg
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Lần truy cập cuối: tuần trước
Đã đăng ký từ: 2024
5 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+48 794 0... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Drachten
9.564 km
Máy cắt guillotine thuỷ lực
SafanVS 430 3
SafanVS 430 3
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Goldenstedt
9.423 km
Máy phay dụng cụ - Đa năng
DECKELFP2 LB
DECKELFP2 LB
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Bocholt
9.575 km
Máy cắt guillotine thuỷ lực
SafanVS 205-4
SafanVS 205-4
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Wijchen
9.630 km
Máy cắt tôn Safan VS 310-6, sản xuất năm 1981.
SafanVS 310-6
SafanVS 310-6
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Goldenstedt
9.423 km
Nhấn phanh - thủy lực
FISCHERDAP 5 /1500
FISCHERDAP 5 /1500
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Áo
9.040 km
Kéo cắt kiểu Guillotine
SAFANSafan VS 310-8 3100 mm x 8 mm
SAFANSafan VS 310-8 3100 mm x 8 mm
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Babberich
9.601 km
Máy chấn tôn SAFAN - H-Brake 120-3100 TS
SafanH-Brake 120-3100 TS1
SafanH-Brake 120-3100 TS1
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Küssaberg
9.598 km
Máy tẩy ba via tấm kim loại
TimesaversSerie-10
TimesaversSerie-10
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Gołdap
8.493 km
Máy chấn tôn SAFAN 300 × 4300 – 300
SafanCNCK
SafanCNCK
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Drachten
9.564 km
Máy chấn tôn
SafanCNCL 80 3100
SafanCNCL 80 3100
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Lübbecke
9.425 km
Máy cắt laser
TrumpfTruLaser 3040
TrumpfTruLaser 3040
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Drachten
9.564 km
Máy cắt guillotine thuỷ lực
SafanHT 430 16
SafanHT 430 16
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Drachten
9.564 km
Máy cắt guillotine thuỷ lực
SafanVS 620 4
SafanVS 620 4
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Friesenheim
9.602 km
Máy tiện điều khiển theo chu trình
WEILERE 40
WEILERE 40
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Hessisch Lichtenau
9.387 km
Máy chấn servo, máy chấn khuôn với điều khiển CNC 4 trục, máy chấn vận hành bằng động cơ điện
SAFANSMK-P 50-2550 TS1
SAFANSMK-P 50-2550 TS1
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi














































































































































































