Bàn lắp ráp nghiêng bằng khí nén Ruchser với trạm chuyển giao băng tải con lăn MKSEA 2 + RWGAT45-20Ruchser
RWGAT45-20 +MKSEA 2
Bàn lắp ráp nghiêng bằng khí nén Ruchser với trạm chuyển giao băng tải con lăn MKSEA 2 + RWGAT45-20
Ruchser
RWGAT45-20 +MKSEA 2
giá cố định chưa bao gồm thuế GTGT
6.800 €
Năm sản xuất
2013
Tình trạng
Đã qua sử dụng
Vị trí
Gütersloh 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Bàn lắp ráp nghiêng bằng khí nén Ruchser với trạm chuyển giao băng tải con lăn MKSEA 2 + RWGAT45-20
- Nhà sản xuất:
- Ruchser
- Mô hình:
- RWGAT45-20 +MKSEA 2
- Năm sản xuất:
- 2013
- Tình trạng:
- đã qua sử dụng
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
6.800 €
- Vị trí:
- Gütersloh, Germany

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21727458
- Số tham chiếu:
- 80067
- Cập nhật:
- lần cuối vào ngày 16.04.2026
Mô tả
Table, rotatable, extendable, and tiltable
Dimensions Base dimensions: 2000 x 1750 mm
Dimensions (max extended): 4500 x 2500 mm
Max. payload when tipping: 250 kg
Max. load capacity when lifting: 370 kg
Equipment conveyance roller tracks:
Iodey Dcicepfx Apzotf
Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines.
Roller rails mounted in front of the uprights at 120 mm spacing.
Pre-feed version with automatically retracting plant part during feeding with the table.
Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm.
Roller conveyor front open for driving in with the assembly table at the element transfer.
Roller height adjustable from 330 to 380 mm.
Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking
Dimensions Base dimensions: 2000 x 1750 mm
Dimensions (max extended): 4500 x 2500 mm
Max. payload when tipping: 250 kg
Max. load capacity when lifting: 370 kg
Equipment conveyance roller tracks:
Iodey Dcicepfx Apzotf
Rear arrangement consisting of 2 rubber roller strips at heights of 400 and 1700 mm above the support surface for models RU-RGAT...Ü for door lines.
Roller rails mounted in front of the uprights at 120 mm spacing.
Pre-feed version with automatically retracting plant part during feeding with the table.
Roller conveyor on the installation surface made of zinc-plated steel rollers, roller length 200 mm, 2-part split without gap at the split, roller diameter 50 mm, distance between rollers 200 mm.
Roller conveyor front open for driving in with the assembly table at the element transfer.
Roller height adjustable from 330 to 380 mm.
Roller conveyor wagon equipped with 4 flange rollers, of which 2 with locking
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi















