Thủy ápRichard Hess MBV GmbH
Presse STHP 80KN
Thủy áp
Richard Hess MBV GmbH
Presse STHP 80KN
giá cố định chưa bao gồm thuế GTGT
4.900 €
năm sản xuất
2018
Tình trạng
Đã qua sử dụng
Vị trí
Sonsbeck 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Thủy áp
- nhà sản xuất:
- Richard Hess MBV GmbH
- Mô hình:
- Presse STHP 80KN
- Số máy:
- STHP 80KN
- năm sản xuất:
- 2018
- Tình trạng:
- gần như mới (đã qua sử dụng)
- tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
4.900 €
- Vị trí:
- Gildestrasse 5, 47665 Sonsbeck, DE
Gọi điện
Bán máy móc

Bạn đã đăng tin máy đã qua sử dụng của mình chưa?
Bán hàng qua Machineseeker không mất hoa hồng.
Tìm hiểu thêm về việc bán máy móc
Tìm hiểu thêm về việc bán máy móc
Chi tiết kỹ thuật
- Tổng chiều cao:
- 1.320 mm
- Tổng chiều rộng:
- 510 mm
- Tổng chiều dài:
- 200 mm
- Lực ép:
- 8 t
- Chiều rộng bàn:
- 300 mm
- Trọng lượng tổng cộng:
- 110 kg
Chi tiết về đề nghị
- ID tin đăng:
- A16652346
- cập nhật:
- lần cuối vào ngày 27.07.2024
Mô tả
1 Hydropneumatic press type STHP 80 kN
Dedpfet Rhb Iex Ahvjku
Bmcbfntr
with two-hand operation - floor model with and base frame
The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Dedpfet Rhb Iex Ahvjku
Bmcbfntr
with two-hand operation - floor model with and base frame
The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2022
Gửi yêu cầu
Điện thoại & Fax
+49 2838 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi