Máy chấn tôn

Placke HQPB H-6 230t x 3.100mm P784

The all-rounder with extra power!

The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level.
Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process.
Press force: 2,300 kN (230 t)
Working length: 3,100 mm
Clearance between uprights: 2,600 mm
Installation height: 450 mm
Overhang: 305 mm
Ram stroke: 265 mm
Height of lower bed above floor: 850 mm
Rapid traverse max.: 200 mm/s
Pressing speed max.: 9.8 mm/s
Retraction speed max.: 150 mm/s
Positioning accuracy of ram: ± 0.01 mm
Ram inclination: ± 10 mm (electrically limited to ± 5 mm)
Gedpfjz Hnzksx Apnjui
Motor power: 18.5 kW
Hydraulic oil tank capacity: 290 l
Operating voltage: 400 V / 3 Ph / 50 Hz
Machine weight: approx. 17.5 t
Description:
> Machine body
Steel S 355 N, design based on FEM analysis
Side stands with two pressure cylinders, above-floor
2-component structural paint, RAL 7004 / 7016
> Hydraulics & Upper beam
Proportional control valve, electronically monitored cylinder synchronization
Double upper beam guide, Heidenhain scales
Separate Y1/Y2 control, inclination monitoring
> Tooling
Top: WILA hydraulic, NSCL-II-HC
Bottom: narrow table, single V (13 × 20)
2 aluminum support arms at the front, approx. 600 mm, height-adjustable
> Crowning
Centrally adjustable, hydraulically-dynamically, CNC-controlled
Active control loop keeps the lower bed in the zero position
Constant bending angle
> Back gauge 4 axes
X-axis 1,100 mm, 400 mm/s, ± 0.01 mm
R-axis 200 mm, 200 mm/s, ± 0.01 mm
Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm
> Control Delem DA 66S
24″ touchscreen on the swivel arm
2D programming, 3D visualization
DXF import, tandem operation
> Safety & Efficiency
CE compliant, Pilz safety PLC
TFS laser light curtain, rear light curtain
eco-MODE start-stop automatic
> Additional equipment
Air conditioning in the control cabinet
LED work area lighting at the rear
Remote diagnostics for Delem control and Pilz PLC

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.