Trung tâm gia công đứngOkuma
GENOS M560-V-e
Trung tâm gia công đứng
Okuma
GENOS M560-V-e
Năm sản xuất
2016
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Iszkaszentgyörgy 

Dữ liệu cơ bản
- Tên máy:
- Trung tâm gia công đứng
- Nhà sản xuất:
- Okuma
- Mô hình:
- GENOS M560-V-e
- Năm sản xuất:
- 2016
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
- Giờ vận hành:
- 8.900 h
Giá & Vị trí
- Vị trí:
- Hrsz. 610/1, 8043 Iszkaszentgyörgy, Ungarn

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23365762
- Cập nhật:
- lần cuối vào ngày 20.11.2026
Mô tả
Control: OKUMA OSP-P300M-R
Table size: 1300 × 560 mm
Max. table load: 900 kgs
Travels (X / Y / Z): 1050 × 560 × 460 mm
Distance from spindle nose to table surface: 150 – 610 mm
Spindle speed: 15000 rpm
Spindle taper: BT40
Spindle motor power: 22 / 18,5 kW
Torque: 199 Nm
Rapid traverse (X / Y / Z): 40 / 40 / 32 m/min
Cutting feed rate: up to 32 m/min
ATC magazine: 32-station (32 tools)
Max. tool length: 300 mm
Max. tool weight: 8 kg
Max. tool diameter: 90 mm (125 mm with adjacent pockets empty)
Tool change time: approx. 1.2 – 2.6 s (chip-to-chip from 4.0 s depending on configuration)
Floor space / Dimensions (W × D × H): approx. 2,564 × 3,194 × 2,746 mm
Machine weight: approx. 7500 kg
Accessories & Equipment:
- Renishaw workpiece probing system with OMP60 probe
- Renishaw tool length measurement system with TS27 sensor
- Coolant system
- Through-spindle coolant (TSC / CTS) (Megjegyzés: az IKZ = Innere Kühlmittelzufuhr angol megfelelője)
- Spindle chiller
- Chip conveyor
Kdjdo Alcfcjpfx Adhow
- Leveling feet / Machine mounts
The machine is in good working condition and available immediately.
Table size: 1300 × 560 mm
Max. table load: 900 kgs
Travels (X / Y / Z): 1050 × 560 × 460 mm
Distance from spindle nose to table surface: 150 – 610 mm
Spindle speed: 15000 rpm
Spindle taper: BT40
Spindle motor power: 22 / 18,5 kW
Torque: 199 Nm
Rapid traverse (X / Y / Z): 40 / 40 / 32 m/min
Cutting feed rate: up to 32 m/min
ATC magazine: 32-station (32 tools)
Max. tool length: 300 mm
Max. tool weight: 8 kg
Max. tool diameter: 90 mm (125 mm with adjacent pockets empty)
Tool change time: approx. 1.2 – 2.6 s (chip-to-chip from 4.0 s depending on configuration)
Floor space / Dimensions (W × D × H): approx. 2,564 × 3,194 × 2,746 mm
Machine weight: approx. 7500 kg
Accessories & Equipment:
- Renishaw workpiece probing system with OMP60 probe
- Renishaw tool length measurement system with TS27 sensor
- Coolant system
- Through-spindle coolant (TSC / CTS) (Megjegyzés: az IKZ = Innere Kühlmittelzufuhr angol megfelelője)
- Spindle chiller
- Chip conveyor
Kdjdo Alcfcjpfx Adhow
- Leveling feet / Machine mounts
The machine is in good working condition and available immediately.
Gửi yêu cầu
Điện thoại & Fax
+36 22 99... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi





















