Thông gió lọc, hệ thống hút khói Novus

Novus Airtower 20.000 EC

Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h
Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking.
Very low energy consumption due to the use of innovative fans.
Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption.
The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%.
Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas.
Layered filter ventilation principle; the device does not require the installation of pipelines.
Patron-type filter cartridges – self-cleaning using compressed air pulses during operation.
Filter cleaning using pressure difference – no loss of compressed air.
Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation.

Year of manufacture: 2017
Total operating hours: 21,809

Parameters:
- 4 EC fans with a power of 3.9 kW each
- Airflow 20,000 m3/h
- Filtration area 222 m2
- 6 patron-type filter cartridges
- Fine final filter
- Fireproof package
Codpfxjxxalne Akaorf
- EC Blue ENERGY PACKAGE
- Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation.
Energy savings depending on the amount of dust present in the hall at any given time.

Very quiet operation
Stock number: 1066

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.