Cưa

MEP SHARK 282 SXI EVO Metallbandsäge

MEP SHARK 282 SXI evo [Semi-automatic]

All MEP models on request !

Motor power 1,5/1,8 kW
Bank opening 285 mm
belt dimensions 2950x27x0,9 mm
Weight 485 Kg
Speed 36/72 m/min.
cutting surface 0° 250 / 220x220 / 280x220
cutting surface 45° right 230 / 200x200 / 220x200
Cutting area 45° left 200 / 170x170 / 200x140
Cutting area 60° right 120 / 80x80 / 140x80
Cutting area 60° left
Description
Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left.

Semi-automatic function:

At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens.

Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button).

Some features:

New centralized control panel on articulated arm to allow the operator to easily switch from any working position.
Control panel with low voltage:
Membrane keypad in polyester with thermoformed highlighted
Push buttons and actuation control signal.
Display to show:
* Diagnostics (messages in user language).
* Alarms (description of alarm causes)
* Status of inputs and outputs
* Counting of the cuts
* Time used for the performed cut
* Current consumption of the saw band motor
* Saw band tension
* Saw band speed
* Numerical display of the head position.
Switch handle IP55 of the manual 24 V cycle.
Complete program of all special cutting cycles.
Identification of other possible special cutting cycles for particular applications.
Fgodpfjcgbq Ijx Aczsh
New hydraulic control unit of the latest generation, highly efficient and with low energy consumption.
Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing.
Double speed of the belt (36/72 m/min.) with control.
Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min.
Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut.
Clamping device laterally movable to the left and right, with quick-action vice.
Manually operated band tension control with display on the screen by means of electronic converter.
Base frame with extendable coolant tray.
Electric coolant pump for cooling and lubrication of the saw band.
Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil.
Chip clearing brush.
The machine is designed for lift truck transport.
Length stop for cuts of the same length
material support arm with roller, for fixing the loading platform
Bimetal saw band for solid and profiled material.
Tools and instructions for use in the user's language.

For further technical data, please refer to the attached PDF document.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.