Cưa vòng lạnh

MEP FALCON 352 Kreissäge

Motor power 1,1/2,2 kW
belt opening 130 mm
Iaodpfx Aecgrkyeazol
belt dimensions 350x32x2,5
weight 220 kg
Speed 30/60 1/min.
Cutting surface 0° 115 / 100 / 130x80
Cutting surface 45° right 100 / 85 / 90x80
Cutting surface 45° left 75 / 75 / 90x65
Cutting surface 60° right
Cutting surface 60° left
Description
Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power.

Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand.

Basic equipment:

clutch adjustable from the outside
Blocking device with vice
Sliding on prismatic guide with adjustable bar
Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line.
Adjustable fixing of the degasser, made entirely of steel.
Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform.
The machine can be lifted.
Endless worm shaft mounted on pair of bearings.
Saw blade holding shaft mounted on off-center punch.
2 speeds 30 and 60 rpm.
Vise opening 130 mm
Machine is supplied without saw blade.
Electrical equipment:

Electrical control panel
marked cable connections
main safety switch provided for padlock
Emergency stop device
Phase failure protection
Speed changeover switch
Thermal magnetic protection
Undervoltage release
Motor with IP 54 protection
Low voltage system 24 Volt
Electric coolant pump 48 V
Motor 1,1/2,2 kW - 400 Volt


For further technical data please refer to the attached PDF document.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.