Máy ép nhiệt

ME-Pressen Vulkanisierpresse

Hydraulic press – versatile use as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press, designed as a double-column press (H-frame construction).

Inspection of the press is possible at the warehouse in Ennepetal. This is a 2.5-year-old, unused press with zero operating hours, being sold with full warranty.

Technical details:

- Robust machine frame
- Capacity: 30 tons at 300 bar
- Pump ASC: 28.5 liters/min.
- Motor: 11 kW – 15 hp
- Oil tank: 600 × 450 × 500 mm – approx. 100 liters
- Cylinder piston: Ø 110 mm
- Cylinder bore: Ø 70 mm
Godpfxju U Ey Ie Ag Sjbi
- Stroke: 500 mm
- Speed, forward: 45 mm/s
- Return: 55 mm/s
- Guide rods: Ø 50 mm
- Table plate: 800 × 550 mm – with T-slots
- Ram plate: 700 × 500 mm – with T-slots
- Total weight: 2,000 kg
- BoschRexroth valves
- Control cabinet technology from renowned manufacturers
- Press table size: 700 × 500 × 70 mm
- Table height: 800 mm, measured from shop floor
- Cylinder dimensions / piston rod: 110 / 75 mm
- Ram size: 700 × 500 × 80 mm
- Emergency stop switch
- Rear protective enclosure made from painted mesh
- Press area lighting
- Rear and sides fully enclosed
- 500 mm high light curtain with 14 mm resolution (finger protection)
- Maximum distance between table and ram: 500 mm
- Cylinder travel: 500 mm
- Front open width: 820 mm
- Pressing force adjustable by rotary knob from 5 to 30 T
- Travel speed: downwards 50 mm/sec, upwards 40 mm/sec
- Total weight approx. 2,000 kg
- Finish in RAL 7035 (light grey) and RAL 2009 (orange)
- Assembly, commissioning, and operator training available for an additional charge
- CE declaration and German-language documentation
- Ram plate guided by two pillars
- Resettable piece counter
- Position limit via cam switch
- Adjustable two-hand control with 3 m cable
- Safety inspection with certificate from an authorized specialist company
- The right side features movable sensors for stroke limitation. This allows a specific stroke, e.g., 300 mm, to be set. The press will then automatically move to the preset point at the push of a button.
- The ram plate is guided by two columns.
- The rear of the press is enclosed, but fitted with air outlets.
- The table features an ejection chute.
- Light barrier with anti-reach-under protection.
- Mountable anti-reach-over guard.
- Optional: 2 heating plates, 500 × 500 mm heating surface each, total size 550 × 550 mm, with controller, up to 200°C, incl. 20 mm thick insulated plate, with timer
- Optional: Installation and training

Delivery times:
Currently, a lead time of approximately 6 weeks is to be expected (without heating plates).
Heating plates delivery time approx. 8 weeks.

Customer service:
From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.