Máy phay

Kunzmann WF 7/3

Kunzmann WF 7/3

Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION.
CE compliant!!

The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours.

Technical data:

Year of manufacture: 1997
Fixed angular table
Clamping slots: 6
Slot width: 14 H 7
Slot spacing: 63 mm
Maximum load: 300 kg
Spindle speeds S I: 1 – 1125 min-1
Spindle speeds S II: 1126 – 4500 min-1
Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min.
Rapid traverse: longitudinal and transverse 5000 mm/min.
Feed rate: vertical 0 – 2000 mm/min.
Rapid traverse: vertical 4000 mm/min.
Travel distances X/Y/Z: 600/400/400 mm
Vertical and horizontal quill - SK40
Hydraulic clamping system
Weight: approx. 2000 kg
Dimensions: approx. 2 x 2 x 2 m
Main drive motor: 7.5 kW

Accessories and equipment:

Heidenhain TNC 124 control
Hydraulic chuck, vertical and horizontal
Automatic central lubrication
Spindle brake
Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples
Handwheels
Dcsdpezy Uh Tsfx Apdsl
Coolant system

About the machine:

Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power.

You can find more milling machines from well-known manufacturers on our website.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.