INMASA Slitter 1100x3
INMASA Slitter 1100x3

Name: INMASA Slitter 1100x3
Brand: INMASA
Availability: InStock

Tình trạng

Đã qua sử dụng

Vị trí

Madrid

INMASA Slitter 1100x3 INMASA Slitter 1100x3

Hiển thị bản đồ

Thông tin về máy móc

Tên máy:: INMASA Slitter 1100x3

Nhà sản xuất:: INMASA

Mô hình:: Slitter 1100x3

Tình trạng:: đã đại tu (đã qua sử dụng)

Giá & Vị trí

Vị trí:: Madrid, Spain

Gọi điện

Chi tiết về đề nghị

ID tin đăng:: A21300617

Số tham chiếu:: 4005

Cập nhật:: lần cuối vào ngày 23.02.2026

Mô tả

SLITTING LINE INMASA 1100x3

Revamped in 2019

Scope of supply

1. Loading carriage for coil up to 15000 Kg

2. Cantilever Uncoiler with hold down roll

3. Threading group with supporting roll + Pinch roll

4. Crop shear

5. Intermediate table

6. Pinch-roll

7. Circular shear (turning unit with 2 pairs of arms, one in-line + one off line for preparation)

8. Exit roll table

9. Scrap recoiler

10. Accumulator pit + Tiltable cover

Lredpfx Aboymbplj Ish
11. Tensioning device with Strip guiding arm

12. Recoiler

13. Unloading carriage

14. 2-arms turnstile

15. Switch cabinets & control panels (New in 2019)

16. Pneumatics & Hydraulics

17. Existing tooling

SCOPE OF THE WORKS CARRIED OUT DURING THE REVAMPING OF THE LINE MADE BY EUROMAQUINA IN 2019

· Complete disassembly for overhaul and cleaning of each line component

· Final paint touch up.

· Electrical disassembly of each component.

· Checking of the elements for defects.

· Overhaul of motors.

· Conductivity, brush cleaning in DC motors, etc. were checked. Not repairable motors were replaced.

· Mechanical assembly of the line components.

· Assembly of components to be replaced due to defective parts.

· Revision of hydraulic cylinders with change of seals. Cleaning and painting.

· Overhaul hydraulic motors. Cleaning and painting.

· Overhaul hydraulic power units. Cleaning and painting.

· Overhaul of pneumatic cylinders and electro-valves.

· Replacement of defective hydraulic piping and hoses.

· Replacement of pneumatic piping.

· Change all wiring on board machine.

· Replace defective boxes on board the machine or paint them.
Coil weight: 15.000 kg
Coil outer diameter: 1650 mm
Coil inner diameter: 508 / 610 mm
Strip thickness: 0.4 – 3 mm
Coil width: 150 - 1100 (1060) mm
Ultimate tensile strength: 600 N/mm2
Yield strength: 500 N/mm2
Exit coil weight: 15.000 kg
Exit coil diameter: 700 – 1550 mm
Exit coil inner diameter: 508 mm
Exit coil width: 31 – 1100 mm
Max. cutting speed: 150 m/min
Disc blades diameter (inner-outer): 160 – 300 mm