Rơ-moóc sơ-mi mởFliegl
SDS 350 Mega
Rơ-moóc sơ-mi mở
Fliegl
SDS 350 Mega
EXW Giá cố định chưa bao gồm thuế GTGT
10.500 €
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Triptis 

Dữ liệu cơ bản
- Tên máy:
- Rơ-moóc sơ-mi mở
- Nhà sản xuất:
- Fliegl
- Mô hình:
- SDS 350 Mega
- Số máy:
- WFDFLT23002024348
- Tình trạng:
- đã qua sử dụng
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
EXW Giá cố định chưa bao gồm thuế GTGT
10.500 €
- Vị trí:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
39.000 kg
Trọng lượng không tải:
5.865 kg
Trọng lượng tải tối đa:
33.135 kg
Tổng chiều dài:
13.850 mm
Tổng chiều rộng:
2.550 mm
Tổng chiều cao:
1.820 mm
Trục và bánh xe
Cấu hình trục:
3 trục
Hệ thống treo:
không khí
Kích thước lốp xe:
435/50 R19,5"
Tình trạng lốp:
49 phần trăm
Tài liệu và chứng nhận
Kiểm định tiếp theo (TÜV):
04/2027
Thông tin chi tiết
Đăng ký lần đầu:
12/2018
Chi tiết về đề nghị
- ID tin đăng:
- A23358848
- Số tham chiếu:
- 49397
- Cập nhật:
- lần cuối vào ngày 19.11.2026
Mô tả
# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
Itodpfx Ado Ak Npaohjp
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
Itodpfx Ado Ak Npaohjp
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2006
198 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 36482... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi












