Rơ-moóc sàn thao tác

ES-GE 3-Achs-Ballastauflieger

You can find our complete inventory of immediately and short-term available vehicles on our website.

Partial list of features. Full equipment details available upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads
* Outer frame as UNP profile
* Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide

Coupling device:
* 2-inch kingpin (also prepared for 3.5-inch)

Underrun protection:
* According to EC regulations, bolted design

Side underrun protection:
* According to EC regulations

Landing gear:
* 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot

Axles:
* 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function
* Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device
* Smartboard/TIM/Infocenter, without TPMS display

Lift axle:
* First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery

Brake system:
* Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco

Tyres:
* 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120
* Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS
* Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer)

Mudguards:
* According to EC regulations, PVC mudguards (half-shells) over all axles
* Anti-spray mud flaps

Load securing:
* 8 pairs of hook plates welded into the outer frame (traction approx. 3 t)
* 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t)

Stake pockets/stakes:
* 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm
* 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop

Front wall:
* Bolted front wall, approx. 1,200 mm high, metal plated

Stake magazine:
* Magazine for plug-in stakes inside the front wall

Floor:
* Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles

Lighting system:
* According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights
* 1x 15-pin and 2x 7-pin connectors on the front cross beam

Equipment:
* Warning sign according to ECE 70
Dusdpfjyz E T Ssx Abwsr
* 2 LED work lights mounted on the lamp bracket (switched via reverse gear)
* Bracket for rotating beacon at the rear (incl. beacon)
* 1 foldable, extendable access ladder at the rear (without platform)
* 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall
* Smart-Board with axle load display
* 2 LED work lights above the front wall, switchable via chassis frame switch
* 2 LED work lights at the height of the supports (switched via reverse ge

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.