Rơ-moóc sàn thao tácES-GE
3-Achs-Ballastauflieger
Rơ-moóc sàn thao tác
ES-GE
3-Achs-Ballastauflieger
Tình trạng
Mới
Vị trí
Essen 

Dữ liệu cơ bản
Giá & Vị trí
- Vị trí người bán:
- Heegstraße 6-8, 45356 Essen, Đức

Gọi điện
Chi tiết kỹ thuật
Kích thước và trọng lượng
Trọng lượng tổng cộng:
45.000 kg
Trọng lượng tải tối đa:
39.080 kg
Trục và bánh xe
Cấu hình trục:
3 trục
Tính năng an toàn
ABS
Chi tiết về đề nghị
- ID tin đăng:
- A23366674
- Số tham chiếu:
- 36625
- Cập nhật:
- lần cuối vào ngày 21.11.2026
Mô tả
You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers
* Designed for high point loads, outer frame as UNP profile, wear plate approx. 8 mm
* Underrun protection approx. 700 mm wide
Fifth Wheel Coupling
* 2-inch kingpin (also suitable for 3.5-inch)
Rear Underrun Protection
* According to EC, bolted design
Side Underrun Protection
* According to EC
Landing Gear
* 24 t landing gear with single-side operation (approx. 66 t test load)
* Jost Module CH (Heavy Duty) S-foot
Axles
* 3 x 9 t air suspension axle unit, manufacturer SAF, with disc brake approx. 430 x 45 mm, ABS
* Wheel connection center-mounted, 10-hole with offset 120
* Total stroke of the air suspension approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary spool valve with detent function, with RTR function, switch for second driving height (+ approx. 50 mm)
* On the holder of the lifting and lowering system, Smartboard/TIM/Infocenter, without display, TPMS
Lift Axle
* First axle liftable, with fully automatic
* load-dependent lift control
Knjdpfx Ade Aldawohed
* Starting aid via button in the cab (15-pole socket PIN12)
* Button in the cab is not included in the scope of delivery
Braking System
* Two-circuit compressed air braking system according to EC with EBS and RSS
* automatic load-dependent regulation
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember
* Without connection line to the tractor unit, manufacturer Wabco
Tires
* 6-fold, 385/65 R22.5 160J on rim 11.75 X 22.5 (manufacturer of our choice)
* Offset 120, basic version tire pressure control system, connected to the CAN bus system of the EBS, tire pressure display in the cab (pre-equipment by the tractor unit manufacturer)
Fenders
* According to EC, PVC fenders (half shells) over all axles, splash guards with anti-spray
Load Securing
* 8 pairs of stake pockets welded into the outer frame (tensile force approx. 3 t)
* 6 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t)
* Stake pocket receptacles/stakes: 5 pairs of stake pocket receptacles embedded in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pocket receptacles embedded in the floor, approx. 90 x 90 x 4 mm
* 10 pcs. plug-in stakes made of galvanized square tube, approx. 80x80x4 mm, with stop at the bottom
Front Wall
* Front wall in bolted design, approx. 1,200 mm high, clad with sheet metal
Stake Rack
* Internal stake rack on the front wall
Floor
* Approx. 28 mm hardwood floor embedded in the outer frame, with galvanized omega steel profiles
Lighting
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights, white in front
* LED outline lights in the rear
* License plate lights, 1x15-pole and 2x7-pole plug connection on the front crossmember
Equipment
* Warning sign according to ECE 70
* 2 pcs. LED work lights on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon on the rear (including rotating beacon)
* 1 pc. folding and extendable access ladder on the rear (without platform)
* 2 pcs. stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall, Smart-Board with ax
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Excerpt from the equipment list:
Complete equipment list available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers
* Designed for high point loads, outer frame as UNP profile, wear plate approx. 8 mm
* Underrun protection approx. 700 mm wide
Fifth Wheel Coupling
* 2-inch kingpin (also suitable for 3.5-inch)
Rear Underrun Protection
* According to EC, bolted design
Side Underrun Protection
* According to EC
Landing Gear
* 24 t landing gear with single-side operation (approx. 66 t test load)
* Jost Module CH (Heavy Duty) S-foot
Axles
* 3 x 9 t air suspension axle unit, manufacturer SAF, with disc brake approx. 430 x 45 mm, ABS
* Wheel connection center-mounted, 10-hole with offset 120
* Total stroke of the air suspension approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm
* Control via rotary spool valve with detent function, with RTR function, switch for second driving height (+ approx. 50 mm)
* On the holder of the lifting and lowering system, Smartboard/TIM/Infocenter, without display, TPMS
Lift Axle
* First axle liftable, with fully automatic
* load-dependent lift control
Knjdpfx Ade Aldawohed
* Starting aid via button in the cab (15-pole socket PIN12)
* Button in the cab is not included in the scope of delivery
Braking System
* Two-circuit compressed air braking system according to EC with EBS and RSS
* automatic load-dependent regulation
* Spring brake cylinders as parking brake
* Interchangeable coupling heads firmly mounted on the front crossmember
* Without connection line to the tractor unit, manufacturer Wabco
Tires
* 6-fold, 385/65 R22.5 160J on rim 11.75 X 22.5 (manufacturer of our choice)
* Offset 120, basic version tire pressure control system, connected to the CAN bus system of the EBS, tire pressure display in the cab (pre-equipment by the tractor unit manufacturer)
Fenders
* According to EC, PVC fenders (half shells) over all axles, splash guards with anti-spray
Load Securing
* 8 pairs of stake pockets welded into the outer frame (tensile force approx. 3 t)
* 6 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t)
* Stake pocket receptacles/stakes: 5 pairs of stake pocket receptacles embedded in the outer frame, approx. 90 x 90 x 4 mm
* 3 pairs of stake pocket receptacles embedded in the floor, approx. 90 x 90 x 4 mm
* 10 pcs. plug-in stakes made of galvanized square tube, approx. 80x80x4 mm, with stop at the bottom
Front Wall
* Front wall in bolted design, approx. 1,200 mm high, clad with sheet metal
Stake Rack
* Internal stake rack on the front wall
Floor
* Approx. 28 mm hardwood floor embedded in the outer frame, with galvanized omega steel profiles
Lighting
* According to EC, 24 Volt with multi-chamber lights
* LED side marker lights
* LED position lights, white in front
* LED outline lights in the rear
* License plate lights, 1x15-pole and 2x7-pole plug connection on the front crossmember
Equipment
* Warning sign according to ECE 70
* 2 pcs. LED work lights on the lamp carrier (switched via reverse gear)
* Holder for rotating beacon on the rear (including rotating beacon)
* 1 pc. folding and extendable access ladder on the rear (without platform)
* 2 pcs. stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall, Smart-Board with ax
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2003
68 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+49 201 8... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Essen
9.562 km
Rơ-moóc sàn thao tác
ES-GE3-Achs-Ballastauflieger
ES-GE3-Achs-Ballastauflieger
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi
































