Máy cắt

DRS Maschinenbau Degen TAM 25/600

Function

The TAM 25/600 cuts off and face-grinds ejector
pins, core-pins and punching-dies precisely within
seconds!
Workpieces from .032 to 1“ diameter, high speed
steel or thungsten-carbide can be cut easily.
Just insert the workpiece into the quick acting
chuck, adjust to desired length and cut it at once.
Dsdpfx Aofig I Nsa Secn
Optional there is an auxiliary chuck for very thin,
short or stepped pins.

Your advantages:

• Quick acting chuck easy to use
• Rapid insert and remove of workpieces
• Cut-off and face-grind in one clamping
• Auxiliary chuck for very thin, short or stepped pins

After cutting off the work piece move it to end position,
snap in lock-pin and measure it by a micrometer.
Now finish workpiece to specified size by
advancing the fixture using the micrometer screw.
To dress the grinding wheel move grinding spindle
forward. It will now be dressed automatically by
the integrated dressing- diamond. This will leave
the micrometer screw at 0-position at all times.

Your advantages:

• Precision advance of workpiece through micrometer-screw
• Integrated dressing diamond for grinding-wheel
• Water-cooled cutting and grinding in standard equipment
• Adjustable grinding spindle to maintain zero "0" - position setting
between cut-off and grinding-spindle

The precision

Drive motor
1,1 KW
400 V
1,2 HP
220 – 440 V
Cut-off-spindle 11000 rpm 11000 rpm
Grinding-spindle 4400 rpm 4400 rpm
Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“
Cut-off-length limits 600 mm 23 – 5/8“
Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore
Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore
Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“
Net weight Kg 135