Đá đánh bóng bằng gốmCORMAK
Ceramiczne kamienie polerskie
Đá đánh bóng bằng gốm
CORMAK
Ceramiczne kamienie polerskie
Giá cố định chưa bao gồm thuế GTGT
34 €
Năm sản xuất
2026
Tình trạng
Mới
Vị trí
Siedlce 

Dữ liệu cơ bản
- Tên máy:
- Đá đánh bóng bằng gốm
- Nhà sản xuất:
- CORMAK
- Mô hình:
- Ceramiczne kamienie polerskie
- Năm sản xuất:
- 2026
- Tình trạng:
- mới
Giá & Vị trí
Giá cố định chưa bao gồm thuế GTGT
34 €
- Vị trí:
- Brzeska 120, 08-110 Siedlce, Polska

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A23356358
- Cập nhật:
- lần cuối vào ngày 19.11.2026
Mô tả
CORMAK Ceramic Polishing Media
CORMAK ceramic abrasive media are designed for vibratory finishing processes, serving as a working medium for surface finishing of components. During the process, the media act abrasively on metal parts, helping prepare them for subsequent processing stages. This accessory is intended for users who require polishing media with a specific geometry for vibratory finishing machines compatible with ceramic media.
When selecting the appropriate media, it is important to consider the shape of the components being processed, their surface condition, and the desired finishing result. Matching the media to these requirements is essential for selecting the correct finishing material.
Key Benefits
- Surface smoothing – helps remove minor surface irregularities, preparing components for further finishing.
- Edge rounding – helps reduce sharp edges and remove small burrs remaining from previous machining operations.
- Batch processing of components – allows multiple parts to be finished in a single cycle, provided that the load composition and process parameters are properly selected.
- 5 kg bag of ceramic media – allows users to measure the required quantity of finishing media. The package weight does not indicate the recommended load per cycle or the maximum permissible capacity of the vibratory finishing machine.
Triangular Ceramic Media — 20 mm Side Length, 10 mm Thickness
Each piece of ceramic media has the shape of an oblique prism with an equilateral triangular base. All three sides of the triangular base measure 20 mm, while the thickness between the triangular bases is 10 mm. The bases are offset relative to each other, and the lateral faces are shaped like parallelograms.
The side lengths of the triangle describe the base of the media, rather than the three overall dimensions of the entire piece. This distinction makes it easier to assess the size of the media before purchasing.
The geometry of the ceramic media should be matched to the surfaces of the components being processed, including any holes, slots, or gaps. The media should not become wedged or trapped inside the components — when selecting the appropriate shape and size, it is also important to ensure that the media can be easily separated from the parts after the finishing process.
Applications of Ceramic Media for Vibratory Finishing Machines
Ceramic media for vibratory finishing machines are used in workshops and manufacturing facilities processing metal components. They are intended for applications requiring abrasive surface smoothing and preparation of parts for subsequent finishing operations. Selection should be based on the requirements of the specific component and finishing process rather than solely on the type of business or industry.
Technical Specifications
Product Type Ceramic polishing media / abrasive finishing media
Brand CORMAK
Material Ceramic
Media Shape Oblique prism
Base Shape Equilateral triangle
Length of Each Side of the Triangular Base 20 mm
Thickness Between Triangular Bases 10 mm
Isdps Ak E Thjfx Adhotp
Shape of Lateral Faces Parallelograms
Application Vibratory finishing of metal components in machines compatible with ceramic media
Weight of Media per Bag 5 kg
Packaging Bag
CORMAK ceramic abrasive media are designed for vibratory finishing processes, serving as a working medium for surface finishing of components. During the process, the media act abrasively on metal parts, helping prepare them for subsequent processing stages. This accessory is intended for users who require polishing media with a specific geometry for vibratory finishing machines compatible with ceramic media.
When selecting the appropriate media, it is important to consider the shape of the components being processed, their surface condition, and the desired finishing result. Matching the media to these requirements is essential for selecting the correct finishing material.
Key Benefits
- Surface smoothing – helps remove minor surface irregularities, preparing components for further finishing.
- Edge rounding – helps reduce sharp edges and remove small burrs remaining from previous machining operations.
- Batch processing of components – allows multiple parts to be finished in a single cycle, provided that the load composition and process parameters are properly selected.
- 5 kg bag of ceramic media – allows users to measure the required quantity of finishing media. The package weight does not indicate the recommended load per cycle or the maximum permissible capacity of the vibratory finishing machine.
Triangular Ceramic Media — 20 mm Side Length, 10 mm Thickness
Each piece of ceramic media has the shape of an oblique prism with an equilateral triangular base. All three sides of the triangular base measure 20 mm, while the thickness between the triangular bases is 10 mm. The bases are offset relative to each other, and the lateral faces are shaped like parallelograms.
The side lengths of the triangle describe the base of the media, rather than the three overall dimensions of the entire piece. This distinction makes it easier to assess the size of the media before purchasing.
The geometry of the ceramic media should be matched to the surfaces of the components being processed, including any holes, slots, or gaps. The media should not become wedged or trapped inside the components — when selecting the appropriate shape and size, it is also important to ensure that the media can be easily separated from the parts after the finishing process.
Applications of Ceramic Media for Vibratory Finishing Machines
Ceramic media for vibratory finishing machines are used in workshops and manufacturing facilities processing metal components. They are intended for applications requiring abrasive surface smoothing and preparation of parts for subsequent finishing operations. Selection should be based on the requirements of the specific component and finishing process rather than solely on the type of business or industry.
Technical Specifications
Product Type Ceramic polishing media / abrasive finishing media
Brand CORMAK
Material Ceramic
Media Shape Oblique prism
Base Shape Equilateral triangle
Length of Each Side of the Triangular Base 20 mm
Thickness Between Triangular Bases 10 mm
Isdps Ak E Thjfx Adhotp
Shape of Lateral Faces Parallelograms
Application Vibratory finishing of metal components in machines compatible with ceramic media
Weight of Media per Bag 5 kg
Packaging Bag
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Trực tuyến lần cuối: Hôm qua
Đã đăng ký từ: 2020
549 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+48 25 63... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi








