Trung tâm phay tiện CNC
CMZ TTL - 66 - 66 - T1Y - T2Y

Năm sản xuất

2021

Tình trạng

Đã qua sử dụng (hoạt động hoàn toàn)

Vị trí

Idstein

Trung tâm phay tiện CNC CMZ TTL - 66 - 66 - T1Y - T2Y

Thông tin về máy móc

Tên máy:: Trung tâm phay tiện CNC

Nhà sản xuất:: CMZ

Mô hình:: TTL - 66 - 66 - T1Y - T2Y

Năm sản xuất:: 2021

Tình trạng:: gần như mới (đã qua sử dụng)

Tính năng hoạt động:: hoạt động hoàn toàn

Giá & Vị trí

Vị trí:: Walramstrasse 27, 65510 Idstein, Deutschland

Gọi điện

Chi tiết về đề nghị

ID tin đăng:: A20256875

Cập nhật:: lần cuối vào ngày 10.10.2025

Mô tả

This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW.

The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets.

It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank.

For more information about this lathe, please refer to the attached brochure or contact us directly.

Equipment includes:
- LPS for left spindle
- Reduction tube for left spindle
- Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle
- Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle
- Tool presetting device
- Side-mounted chip conveyor (standard version)
- Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter
- Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter
- Coolant wash nozzle
- TA/06000/10 8,000W coolant chiller unit
- Machine status indicator light
- Tool life management system
- Tool load monitoring
Ppjdpfxjxmhdnj Ad Ssu
- Programmable automatic parts catcher (pneumatic)
- The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts
- Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor
- Coolant supply through right spindle
- Interface for bar feeder (unimag)
- Preparation for extraction unit, connection flange Ø100

The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated.

Further information available on request.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.