Dải cạnh

Brandt Optimat KDN 330

Used machine

Year of manufacture: 2006

With gluing unit for hot melt adhesive granulate
Processing of PU adhesive granulate possible, subject to adhesive processing regulations

Glue reservoir located below the glue roller

Application of glue to the workpiece via glue roller in both co- and counter-rotation

With contact heating shoe for preheating the workpiece

Automatic edge magazine for roll material and fixed lengths

Pressure zone with pneumatically operated main pressure roller and special secondary pressure rollers to consolidate the upper and lower glue joints

Centrally adjustable top pressure

Central manual chain track lubrication

Control panel at the machine infeed

Cross-cut saw unit for front and rear edge overhang; high-precision linear guide
2 motors, each 0.18 kW
Fpjdpfjwkbd Eox Aczjn
Swivel range for straight and bevel trimming: 0-15 degrees

Flush milling unit top and bottom with vertical and horizontal tracing
Swivel range 0-15 degrees with 2 milling motors and reversible insert combination (straight/radius)
Digital counters allow for fast and precise, i.e., repeatable, settings
Two-point pneumatic adjustment for upper and lower milling motors

Scraper unit for finishing with horizontal/vertical tracing

Extendable workpiece support up to 350 mm

Integrated track control for contactless control of processing functions.
Adjustable via keypad and LED display

Workpiece thickness: 8 - 50 mm

Edge thickness: 0.4 - 3 mm

Feed speed: approx. 9 m/min.

Connected load: 4.1 kW

Compressed air connection: 6 bar

Weight: approx. 750 kg

Machine length: 3,150 mm

Availability: short-term
Location: Röllbach

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.