Dải cạnh

Brandt Optimat KDN 330

Used machine

Year of manufacture: 2004

with gluing unit for hot-melt adhesive granules

Glue reservoir located below the glue roller

Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes

automatic edge magazine for coil material and fixed lengths

Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint

Centrally adjustable upper pressure

Central manual chain conveyor lubrication

Control panel at machine infeed

End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides
2 motors, each 0.18 kW
Swivel range for straight and bevel cutting 0–15 degrees

Flush-milling unit, top and bottom, with vertical and horizontal tracing
Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius)
Digital counters enable rapid and precise, i.e., repeatable, settings
Two-point pneumatic adjustment for upper and lower milling motors

Scraper unit for finishing processing with horizontal/vertical tracing

Support table extendable up to 350 mm

Integrated section control for contactless operation of processing functions.
Settings via keyboard and LED display

Workpiece thickness: 8–50 mm
Edge thickness: 0.4–3 mm
Feed speed: approx. 9 m/min

Connected load: 4.1 kW
Compressed air connection: 6 bar

Weight: approx. 750 kg
Machine length: 3,150 mm
Fpodpfxexya Rts Ah Hsb

Availability: short term
Location: Flörsheim

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.