Membrane press

Wemhöner Vario Pin Basic 1000 plus

Membrane Press WEMHÖNER VARIOPRESS® –
Model BASIC Plus

Technical Data:

Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system.

Year of Construction: 2012

Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece.

Dimensions of the heating plate: 2,800 x 1,500 mm
Height of the press chamber: 60 mm
Working height: approx. 950 mm
Opening width: max. 150 mm
Automatic membrane tension: Yes
Number of press cylinders: 6
Diameter of press plungers: Ø 125 mm

Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom.

Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm

Total press force: 2,400 kN
Installed power: 55 kW
Operating voltage: 400 V
Control voltage: 24 V
Brake voltage: 205 V
Frequency: 50 - 60 Hz
Electrical equipment: According to EN
Cutting station: Yes
Chamber pressure: max. 6 bar
Operating pressure of the hydraulic system: max. 320 bar
Required air pressure: min. 8 bar / approx. 80 Nl/

Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm

2-daylight lifting system including support table
2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning

Turning device – lateral
As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife.

- Robust, welded steel frame construction for supporting the machine elements
- Hydraulically controlled turning process
- Turning table with plastic cover
- Vacuum system for the turning table
- Turning process approx. 18 seconds

Electrical control:
Dsdpfx Afo Aid Ete Sokw
Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.