Sơ mi rơ moóc sàn di động

STAS bioSTAR 91 cbm/8 mm Boden/Staplerbefahrbar

bioSTAR 91 cbm/8 mm floor/forklift compatible/steel rims
Internal length of the body: 13500 MM
Internal width of the body: 2475 MM
Internal height of the body: 2650/2825 MM
Volume of the body: 91 cbm
Wheelbase: 1310 MM
Saddle height: 1150 MM

TECHNICAL DESCRIPTION
1. FRAME
SUBFRAME: High-quality construction made of steel S355JR (= ST52.3). Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanization.

SADDLE HEIGHT: The exact saddle height is 1150mm.

AXLES: Tridem: Manufacturer: JOST (EX-MERCEDES) = MANUFACTURER'S CHOICE. Capacity: 3 x 9 tons. Suspension: Original JOST air suspension. Brakes: Large disc - Offset: ET 120. BVA: with

BRAKE WEAR INDICATOR (BVA) connection.

The first and third axles are automatic lift axles (automatic lifting when unladen, automatic lowering when loaded). The lift axles are controlled via the EBS-E system. Both axles lift independently.

The starting aid is activated when a button is pressed in the truck (truck equipment not included).

AIR SUSPENSION: Lifting and lowering device. Aluminum air tank.

6 x 385/65 R 22.5 tires for regional transport on steel rims. ET 120.

SADDLE SUPPORTS: WEWELER with leveling supports for air-sprung vehicles. Mechanical version with single-sided operation and 2 speed levels.

BRAKE SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR. 2-circuit compressed air brake system according to CE directives. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System).

LIGHTING: ASPÖCK 24-volt electrical system. 2 x 7-pin + 1 x 15-pin sockets, ISO connection. Aspöck kit. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC.

REAR LIGHTING IN THE UNDER RIDE GUARD: The lighting is mounted in the fixed aluminum under ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version.

Djdez Nuhkjpfx Apaewc
WORK LIGHTS ON THE FRAME: 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console.

HYDRAULIC SYSTEM: Edbro hydraulic system: Pressure: 1 female. TYPE ARGUS HDK. Return line: 1 female, TYPE ARGUS HDK DA VINCI 29227.

HYDRAULIC HOSES: Hydraulic hoses 3/4 - 1, length 3,000 mm.

HYDRAULIC POSITION: Connection on the front wall. With an additional connection option below the body in front of the supports.

ACCESSORIES:
3 holders for broom, shovel and scraper
Aluminum ladder (3.7 m)
With air connection mounted in the toolbox.

Retractable ladder integrated at the rear of the vehicle, on the right side.

With pneumatic central locking.
With TÜV certificate for load securing.

With standard side impact protection.

Toolbox PVC.

POSITION CONTROL CONSOLE + HYDR. SYSTEM BOX: The control console is mounted in front of the axles on the left side. The box for operating the system from the ground is also mounted in front of the axles on the left side.

FENDER: 6 plastic single-wheel fenders. 2 Clear Pass splash guards are permanently mounted on the plastic fenders.

SPLASH GUARD: A retractable splash guard (black - EBB) over the entire width of the under ride guard.

WHEEL CHOCKS: With two plastic wheel chocks with holder.

2. DUMP BODY
FRONT WALL: The front wall consists of strong aluminum plank profiles.

COVERING INSIDE BETWEEN FLOOR-FRONT WALL: Fixed sealing between floor and front wall by means of aluminum profile and PVC sealing.

SIDE WALLS: Side walls in smooth design inside and outside. Double-walled s

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.