Sơ mi rơ moóc sàn di động

STAS BioSTAR 13.50 92m³ elektr. Vedeck

Chassis:
Superstructure manufactured using a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength, cross members 140mm high – reinforced design (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semi-trailer construction max. total weight up to 39,000 kg)

Axles and Suspension: Disc brake 22.5
Jost (DCA) axle units – off-road, 3x9t with DCA air suspension, ECAS lifting and lowering valve, Wabco Smartboard, electronic brake wear indicator BVA – can be read in the central control unit,
1st axle liftable with starting assist, 3rd axle liftable with Optiturn and Optiload without central control unit equipment, Wabco Trailerpulse – tire pressure monitoring system

Tires and Wheels:
6 wheels with tires of size: 385/65 R22.5, tires approx. 60-70% on steel rims silver in 11.75x22.5 ET 120

King Pin:
2" king pin screwed into a 10mm steel plate

Landing Gears:
Mechanical landing gears with two speeds, 2x 20t support load with pivoting foot

Braking System:
According to EG standard, EBS-E system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation in front of the first axle on the left, aluminum air reservoir system

Electrical System:
According to the guidelines of EG standard 91/633 and 97/28 with five-chamber lights type: Aspöck ECOLED 3, 24V system with 1x15-pole and 2x7-pole socket with side marker lights - LED flashing, 2x reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2x reversing lights in the lamp carrier, audio alarm when reversing

Superstructure/Body:
Body inside fully welded, reinforced side walls, front wall load 17,250 dkN, side wall load 13,400 dkN, rear wall load 10,400 dkN, aluminum body, side walls 30mm thick aluminum side wall profiles (2-3mm) 600mm wide, completely welded with upper and lower belts reinforced, plank profiles inside fully welded, floor laid as a sliding floor system on 140mm cross members, floor load capacity approx. 9t/m?, cross members mounted closely together (approx. 350mm), aluminum front wall with 600mm plank profiles (2-3mm) in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors 30/50mm thick with 2 rotating rod locks in the welded aluminum rear frame, attached in Teflon and INOX bearings, doors secured in the open position with two fixed stainless steel door latches, hard wear plates on the side walls approx. 2,000x1,500x4 mm fully welded, moving residual emptying wall with Kevlar fabric approx. 1,800mm long, plus side Kevlar fabric seal, service door in the front wall on the left, opening inwards

Hydraulic System "Cargo-Floor" Sliding Floor System:
Knedpfx Aez S St Aogvjc
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD slide bearings plus anti-lift slide bearings, floor type: CF 10mm ribbed, end plate aluminum, hydraulic cylinder with approx. 200mm working stroke, hydraulic connection between the support legs with a separate possibility for connecting the hydraulic line to the front wall, load compartments to be specified, line size NW 21, operating pressure 190-max 250bar, aluminum end pieces welded into the sliding floor, control console in front of the first axle on

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.