Sơ mi rơ moóc sàn di động
STAS 13.50 "ECOhddisc93" 92,5m³

Giá cố định chưa bao gồm thuế GTGT
22.680 €
Tình trạng
Đã qua sử dụng
Vị trí
Korschenbroich-Glehn Đức
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
Sơ mi rơ moóc sàn di động STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

Dữ liệu cơ bản

Tên máy:
Sơ mi rơ moóc sàn di động
Nhà sản xuất:
STAS
Mô hình:
13.50 "ECOhddisc93" 92,5m³
Tình trạng:
đã qua sử dụng

Giá & Vị trí

Giá cố định chưa bao gồm thuế GTGT
22.680 €
Vị trí người bán:
Dieselstr. 9, 41352 Korschenbroich-Glehn, Đức Đức
Gọi điện

Chi tiết kỹ thuật

Kích thước và trọng lượng

Thể tích khoang chứa hàng:
93 m³
Chiều dài không gian chứa hàng:
13.535 mm
Chiều rộng khoang hàng:
2.480 mm
Chiều cao khoang chứa hàng:
2.825 mm

Trục và bánh xe

Cấu hình trục:
3 trục

Thông tin chi tiết

Đăng ký lần đầu:
12/2018

Chi tiết về đề nghị

ID tin đăng:
A23344004
Số tham chiếu:
4430
Cập nhật:
lần cuối vào ngày 17.11.2026

Mô tả

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120

Kingpin:
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Hedpfxo Akp Rfs Ab Tjnw
Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.

Nhà cung cấp

Đã đăng ký từ: 2002

18 Quảng cáo trực tuyến

Gọi điện

Gửi yêu cầu

đấtus 
Đức
Áo
Thụy Sĩ
Hoa Kỳ
Vương quốc Anh
Pháp
Bỉ
Tây Ban Nha
Mexico
Ý
Hà Lan
Ba Lan
Liên bang Nga
Belarus (Cộng hòa Belarus)
Ukraina
Estonia
Thổ Nhĩ Kỳ
New Zealand
Ai-len
Cộng hòa Séc
Đan Mạch
Phần Lan
Thụy Điển
Na Uy
Luxembourg
Hy Lạp
Litva
Latvia
Iceland
Bồ Đào Nha
Braxin
Venezuela
Argentina
Hungary
Slovakia
Rumani
Moldova
Slovenia
Serbia
Montenegro
Albania
Croatia
Bulgaria
Bắc Macedonia
Bosnia và Hercegovina
Israel
Ai Cập
Ma-rốc
Ấn Độ
Indonesia
Hàn Quốc
Nhật Bản
Thái Lan
Malaysia
Việt Nam
Trung Quốc, Cộng hòa Nhân dân
Đài Loan
Iran
Bangladesh
Lưu ý: Yêu cầu của bạn sẽ được chuyển tới tất cả người bán trong danh mục máy móc. Nhờ vậy, bạn có thể nhận được rất nhiều lời đề nghị.
Không thể gửi yêu cầu. Vui lòng thử lại sau.

Điện thoại & Fax

+49 2182 ... quảng cáo