Máy đánh mộng một đầu

Sedgwick TESH

aking only minutes to set up, the Sedgwick TESH is easy to use and accurate in operation. Work is positioned on the rolling table against a depth stop and a fence, and is secured by a cam action clamp. Its end is then passed between two horizontally mounted cutterheads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in shoulder length are set using a multi-position depth stop, and staggered tenons are achieved by simple handwheel adjustment of the top motor.
Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridles are all possible on this versatile machine. Combinations of 90 degree and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction.
The Sedgwick TE/TESH is designed and built to withstand continuous production use. Its cast iron base, column and slideways provide a rigid and durable mainframe assembly, and the 2.2Kw motors supply ample power. The generously proportioned cast iron sliding table is mounted on bearing equipped hardened steel rollers for minimum wear, and cutterhead slide movements are easily adjusted on dovetail slides for ease of maintenance.
The TE/TESH offers all of these safety features as standard:
Automatic braking
Starters with thermal overload, no volt release protection and lock off emergency stop switch.
High performance lightweight cutter blocks with chip limiting devices
Large diameter dust extraction outlets
One piece front cutter guard
Front & rear table guards

Machine Specification :
Ex College A1 Condition - Unused
TIMBER CAPACITY
150 x 300mm
Csdsy Efzqspfx Aa Rsgt
MAXIMUM TENON LENGTH
150mm
TABLE SIZE mm
765 x 340 (765×300 useful)
TABLE WORKING HEIGHT
890mm
TABLE QUADRANT ADJUSTMENT
+/- 0-60 degrees
HORIZONTAL TENONING HEADS
CUTTERBLOCKS
150 x 150 x 30mm
MAX TOOLING DIAMETER
155mm (BOTTOM) 200mm (TOP)
VERTICAL ADJUSTMENT OF BOTTOM CUTTERBLOCK
-2mm / + 77mm
VERTICAL ADJUSTMENT OF TOP CUTTERBLOCK
+4mm / + 150mm
HORIZONTAL ADJUSTMENT OF TOP CUTTERBLOCK
-50mm /+ 20mm
DUST EXTRACTION OUTLETS
2 x 150mm
MOTOR RATING
2 x 2.2 Kw (S6 40%)
FULL LOAD CURRENT
4.75 AMPS
STARTING CURRENT
35 AMPS
VERTICAL SPINDLE
SHAFT DIAMETER
40mm
EFFECTIVE LENGTH OF SHAFT
205mm
VERTICAL MOVEMENT
112mm
HORIZONTAL MOVEMENT
150mm
MAXIMUM TOOLING DIAMETER
350mm
SPINDLE SPEED
4000 RPM
MOTOR RATING
5.5Kw (S1)
FULL LOAD CURRENT
11.5 AMPS
STARTING CURRENT
69 AMPS
ELECTRICAL
VOLTAGE / FREQUENCY
3 PHASE + EARTH; 400/230 V – 50/60 Hz
REQUIRED FUSE SIZE
25A/ph
REQUIRED CABLE SIZE
4mm2