Bottom loading and top loading for gasoline, diesel, heating oil, etc. Saddle plate height 1200mm unloaded. Metering system: as per GMV with additional venting, meter DN 100 / 1,000 l/min, manufacturer Sening, with full-hose valve. 1 measured outlet. Emptying hose, cylindrical shape, separate parallel tank, material: light metal, 0.5 bar test pressure. 5, 5.0 mm minimum wall thickness, head 5 mm, bottom 7.5 mm. 5 Chamber 1 with sloped bottom plate, discharge slope towards the rear (wedge). 5 3 chambers, approx. 38,500 l gross, distribution from front: 13,300 / 6,000 / 19,200 liters gross. 5 Total filling volume approx. 36,200 l net, max. filling volumes: 12,500 / 5,500 / 18,200 liters (= max. filling volumes for bottom loading according to VOC. The actual usable filling volume also depends on the permissible axle loads and the permissible total weight!). 5 Baffle plates as required. 5 Discharge slope controlled by actuating the air suspension during discharge. Lifting loops at the front and rear of the tank to upright the partially loaded tank semi-trailer. 5 Conductors (deflectors) in the chambers to dissipate static charge. 5 Supports (small tables) as bottom valve protection and for holding the filling pipe during top loading, mounted in each chamber. Walkway / ladder / folding railing: as per safety walkway on the right. 5 1 folding railing within the dome fairing, right. 5 Intermediate platforms in front of the dome covers. 5 1 access ladder at the rear right. Dome fittings: 5 per chamber: • 1 manhole cover NW 500 (EN 13317) with filling opening DN 265, recessed installation. • 1 pneumatic tilt valve with sequential control. • 1 vent pot with flame arrester. • 1 overfill protection, electric VOC version (EN 13922). Bottom fittings: « Per chamber 1 pneumatic bottom valve DN 100 (EN 13316). « 1-channel collector. Bottom loading: 5 Bottom loading cabinet on the left. • Swing flap, lockable (square lock). • Drainage channel and drainage device (front). 5 per chamber: • 1 filling coupling. • 1 electric overfill protection system (VOC) 10-pole VOC socket, acting on the land side. Unloading device: « Right side in the fitting cabinet: • Bus flap, lockable (square lock). • Drainage channel and drainage device (front). 38,500 l capacity, 3 chambers (13,300/6,000/19,200), wall thickness 5mm, tank code LGBF for low-viscosity mineral oils class 3. 1 metering system, pump 1x full-hose, discharge on the right side of the vehicle, hydraulics: 8 Hydraulic pump drive. Hydraulic hoses. Coupling plugs (supply / leak oil / return). Pneumatics: for supplying the braking system, air suspension and the tank fittings: Air tank made of aluminum. Test connections combined. Accessories: 2 fire extinguishers 6 kg in a plastic box. 2 wheel chocks. 1 changeover warning board at the rear. 3 flame symbols, foldable. 3 hazard labels “environmentally hazardous substances” (Fisch & Baum), foldable. Rear view camera, manufacturer Motec, in the upper lighting bar. Pneumatically actuated flap at the rear of the trailer. Supply of the imaging components for the tractor unit (without installation). 1 container cabinet made of light metal, rear right. Acoustic reversing buzzer at the vehicle rear. Inclination indicator (level), right. 2 grounding lugs per vehicle side. 1 aluminum hammer, right. 1 shaft hook, right. 2 pole boards, right. 2 absorbent containers with holder. Pylons with holder. Shovel and broom. Drip trays under the outlets. Shaft cover.
Prsdpfxs Agduzs Abksc
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
