Máy mộcSchmidler
S4
Máy mộc
Schmidler
S4
giá cố định chưa bao gồm thuế GTGT
55.000 €
Năm sản xuất
2000
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Westerlo 

Hình ảnh cho thấy
Hiển thị bản đồ
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
55.000 €
- Vị trí:
- Westerlo, Bỉ

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A21777013
- Cập nhật:
- lần cuối vào ngày 23.04.2026
Mô tả
We offer this used Schmidler S4 carpentry machine, year of manufacture 2000.
Manufacturer: Schmidler
Model: S4
Year of manufacture: 2000
Machine type: carpentry machine
- 4-strand cross conveyor (inclined, ascending)
- Infeed roller conveyor
- Zero point detection
- Electronically controlled under-table swing cut-off saw
- Saw blade diameter: 710mm
- Swivel angle: 360 degrees
- Tilt: 0-65 degrees
- Scrap wood pusher
- Marking pin horizontal (from below) and vertical (from behind)
- Universal milling unit incl. finger joint cutter and dovetail milling head
- Horizontal drilling unit – rafter nail drilling device
- Vertical drilling unit
- Powered outfeed roller conveyor
- Pneumatic push ruler
- Transport & measuring system
- Conveyor belts need to be replaced
- Controls: sema btl
Maximum workpiece dimensions:
Height: 300mm
Width: 400mm
Total length: approx. 21m
Infeed roller conveyor
Outfeed roller conveyor with push ruler and deposit rods
Dsdpfxjy Ewxzo Agiokl
Machine used, operational.
Conveyor belts need replacement.
Machine can be viewed by appointment.
Available immediately.
If you have any questions or would like more information, feel free to send us a message or call us.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Manufacturer: Schmidler
Model: S4
Year of manufacture: 2000
Machine type: carpentry machine
- 4-strand cross conveyor (inclined, ascending)
- Infeed roller conveyor
- Zero point detection
- Electronically controlled under-table swing cut-off saw
- Saw blade diameter: 710mm
- Swivel angle: 360 degrees
- Tilt: 0-65 degrees
- Scrap wood pusher
- Marking pin horizontal (from below) and vertical (from behind)
- Universal milling unit incl. finger joint cutter and dovetail milling head
- Horizontal drilling unit – rafter nail drilling device
- Vertical drilling unit
- Powered outfeed roller conveyor
- Pneumatic push ruler
- Transport & measuring system
- Conveyor belts need to be replaced
- Controls: sema btl
Maximum workpiece dimensions:
Height: 300mm
Width: 400mm
Total length: approx. 21m
Infeed roller conveyor
Outfeed roller conveyor with push ruler and deposit rods
Dsdpfxjy Ewxzo Agiokl
Machine used, operational.
Conveyor belts need replacement.
Machine can be viewed by appointment.
Available immediately.
If you have any questions or would like more information, feel free to send us a message or call us.
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2026
1 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+32 477 5... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Quảng cáo nhỏ
Zierenberg
9.414 km
Máy chế biến gỗ
SchmidlerS4
SchmidlerS4
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi













































