Máy đục lỗ tự động

Raster HR SL4S

Four-column punching press
Manufacturer: Hermann Raster KG
Type: HR SL4S

Working area
Distance from ram center or distance between the columns under the guide: 160 mm
Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm
Smallest / largest distance from clamping table to ram guide: 110 / 150 mm

Clamping table
Clamping area: 600 x 320 mm

Clamping ram
Smallest / largest stroke: 0 / 40 mm
Iedewcxccopfx Ah Hjtp
Ejector stroke (max. 20 mm)
Stroke rate: 200-1000 per minute
Straightening range: 70 mm
Clamping area: 400 x 250 mm
Clamping pin: Hole diameter: 40 mm; Depth 70 mm

Safety device
Electro-pneumatic clutch and spring-loaded brake

Power
Normal pressure 25,000 kp
Cutting capacity 625 mm², K=40 kg/mm²

Floor area required without soundproofing
1 m x 1 m x 2.45 m

Weight without soundproofing 3,600 kg

Floor area required with soundproofing
1.60 m x 2.20 m x 2.80 m

Drive type
Voltage 380-660 V
Current type: Three-phase current
Total power requirement 6 kW
Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm
Gearbox: PIV, FK NA HB 22
Control cabinet: AEG, 190300
Central lubrication: Woerner, PA 15.M1

Flat/V-belt 3, 17 x 2220, rubber material
Drive: Variable speed drive
Pull width: 65 mm
Pull diameter: 224 mm

Special features
Gripper feed Z2
Useful width: 180 mm
Soundproof cabinet sta Schalltechnische Anlagen GmbH

The machine is connected to the power supply and can be tested.

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.