Máy tiện ống dẫn khí và dầuPOREBA
TPL 90 Oil Country Lathe Hollow Spindle
Máy tiện ống dẫn khí và dầu
POREBA
TPL 90 Oil Country Lathe Hollow Spindle
Năm sản xuất
1984
Tình trạng
Đã qua sử dụng
(hoạt động hoàn toàn)
Vị trí
Gorzów Wielkopolski 

Dữ liệu cơ bản
- Tên máy:
- Máy tiện ống dẫn khí và dầu
- Nhà sản xuất:
- POREBA
- Năm sản xuất:
- 1984
- Tình trạng:
- rất tốt (đã qua sử dụng)
- Tính năng hoạt động:
- hoạt động hoàn toàn
Giá & Vị trí
- Vị trí:
- 66-400 Gorzów Wlkp., Polska

Gọi điện
Chi tiết kỹ thuật
Trục chính
Lỗ trục chính:
320 mm
Thông tin chi tiết
Đường kính tiện:
1.200 mm
Đường kính tiện trên bàn trượt ngang:
630 mm
Đường kính tiện trên bàn trượt:
930 mm
Chiều dài tiện:
3.000 mm
Chi tiết về đề nghị
- ID tin đăng:
- A21926613
- Cập nhật:
- lần cuối vào ngày 16.05.2026
Mô tả
Lathe in very good technical condition, has seen very little use and was not used for machining pipes.
The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe.
This model fulfills all the specific criteria for machines intended for the Oil & Gas sector:
• Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes.
• Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle.
• Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components.
• Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting.
In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category.
TECHNICAL SPECIFICATIONS:
Geometric parameters and machining ranges
• Swing over bed: 930 mm / 36.6 in
• Swing over cross slide: 630 mm / 24.8 in
• Swing in gap: 1200 mm / 47.2 in
• Maximum turning length between centers: 3000 mm / 120 in
• Bed width: 585 mm / 23.0 in
Headstock
• Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version)
• Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm
• Number of spindle speed steps: 18
Feed and thread cutting system
• Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev
• Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev
• Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP)
Tailstock
• Tailstock quill diameter: 130 mm / 5.1 in
• Tailstock quill travel: 300 mm / 11.8 in
• Internal taper of quill: Morse No. 6 (MT6)
Knodpfxjy Sf Aze Adhed
Drive and dimensions
• Main motor power: 22 kW / 29.5 HP
• Overall length: approx. 5500 mm / 216.5 in
• Overall width: approx. 1750 mm / 68.9 in
• Overall height: approx. 1500 mm / 59.0 in
• Total weight: approx. 8000 kg / 17,630 lbs
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe.
This model fulfills all the specific criteria for machines intended for the Oil & Gas sector:
• Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes.
• Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle.
• Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components.
• Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting.
In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category.
TECHNICAL SPECIFICATIONS:
Geometric parameters and machining ranges
• Swing over bed: 930 mm / 36.6 in
• Swing over cross slide: 630 mm / 24.8 in
• Swing in gap: 1200 mm / 47.2 in
• Maximum turning length between centers: 3000 mm / 120 in
• Bed width: 585 mm / 23.0 in
Headstock
• Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version)
• Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm
• Number of spindle speed steps: 18
Feed and thread cutting system
• Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev
• Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev
• Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP)
Tailstock
• Tailstock quill diameter: 130 mm / 5.1 in
• Tailstock quill travel: 300 mm / 11.8 in
• Internal taper of quill: Morse No. 6 (MT6)
Knodpfxjy Sf Aze Adhed
Drive and dimensions
• Main motor power: 22 kW / 29.5 HP
• Overall length: approx. 5500 mm / 216.5 in
• Overall width: approx. 1750 mm / 68.9 in
• Overall height: approx. 1500 mm / 59.0 in
• Total weight: approx. 8000 kg / 17,630 lbs
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2023
25 Quảng cáo trực tuyến
Gửi yêu cầu
Điện thoại & Fax
+48 789 0... quảng cáo
Những tin rao vặt này cũng có thể bạn quan tâm.
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Desio
9.593 km
Máy phay cột di động
MECOFAGILE M3
MECOFAGILE M3
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Madrid
10.779 km
Dây chuyền cắt dọc GUIDA 1500x6, sẽ có sẵn vào năm 2027 như MỚI
GUIDASlitting line 1500x6
GUIDASlitting line 1500x6
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Ljubljana
9.183 km
Máy khoan bàn CNC
ScharmannHeavycut 3.2
ScharmannHeavycut 3.2
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Ai-len
10.449 km
Máy giặt thùng / khay Newsmith
NewsmithKM1726
NewsmithKM1726
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Goldenstedt
9.423 km
Nhấn phanh - thủy lực
FISCHERDAP 5 /1500
FISCHERDAP 5 /1500
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Maarheeze
9.656 km
Động cơ Palăng Demag động cơ palăng
Demag
Demag
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Velen
9.550 km
Máy ép xưởng - thủy lực
HIDROLIKSANHD 60 - 820
HIDROLIKSANHD 60 - 820
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Birmingham
10.088 km
Dập phanh
AdiraQHD-30060 – 6metre
AdiraQHD-30060 – 6metre
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Lübbecke
9.425 km
Máy cắt laser
TrumpfTruLaser 3040
TrumpfTruLaser 3040
Thành công
Tin nhắn của bạn đã được gửi đi.
Quảng cáo nhỏ
Vilalba
10.928 km
đường cắt ngang
DemaqEvo 4.0
DemaqEvo 4.0
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi























































































































