Trung tâm gia công ngangOpplinger
Optimatic RSMO 095
Trung tâm gia công ngang
Opplinger
Optimatic RSMO 095
giá cố định chưa bao gồm thuế GTGT
51.000 €
năm sản xuất
2022
Tình trạng
Đã qua sử dụng
Vị trí
Schwarzach 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Trung tâm gia công ngang
- Nhà sản xuất:
- Opplinger
- Mô hình:
- Optimatic RSMO 095
- Năm sản xuất:
- 2022
- Tình trạng:
- gần như mới (đã qua sử dụng)
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
51.000 €
- Vị trí:
- Schwarzachtobelstr. 26, 6858 Schwarzach, AT

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A19353486
- Cập nhật:
- lần cuối vào ngày 15.07.2025
Mô tả
Fully automatic straightening center for bandsaws
we are selling it after little use because we had a generational change in the company and in the course of this, converted the entire machine park to Iseli.
Previously we had the predecessor model for many years and were very satisfied.
In one setup, automatic and uncompromising
machining of all bandsaw blades
Leveling, tensioning, back straightening, maintaining rest period
Evenly processed bandsaw blades
Better cutting speed, reduced cutting loss
Less specialist staff, better quality in the sharpening room
Technical data:
Connection values:
Electrical: 400 V 50 Hz or special voltages
Compressed air: 1/4″ gas thread
Air pressure: minimum 5 bar, 0.7 liter per stroke
Bdodjwrx Rrepfx Ab Nji
Saw blade dimension:
Blade width: 60 mm to 305 mm / 60 mm to 381 mm, special up to 420 mm
Blade length: from 4200 mm
Processing time: Saw blade 206 mm x 10 m approx. 30 min
Leveling tolerance: 0.02 mm - 0.03 mm
Tension tolerance: 0.02 mm compared to the calculated tension curve or the stored optimum curves
Tension: all desired tension profiles adjustable
Control: PLC control
Dimensions:
Length without deflection: 2200 mm
Height: 1540 mm
Width: 1115 mm
Working height: 1110 mm
Weight: 1120 kg
The machine can be inspected on site!
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
we are selling it after little use because we had a generational change in the company and in the course of this, converted the entire machine park to Iseli.
Previously we had the predecessor model for many years and were very satisfied.
In one setup, automatic and uncompromising
machining of all bandsaw blades
Leveling, tensioning, back straightening, maintaining rest period
Evenly processed bandsaw blades
Better cutting speed, reduced cutting loss
Less specialist staff, better quality in the sharpening room
Technical data:
Connection values:
Electrical: 400 V 50 Hz or special voltages
Compressed air: 1/4″ gas thread
Air pressure: minimum 5 bar, 0.7 liter per stroke
Bdodjwrx Rrepfx Ab Nji
Saw blade dimension:
Blade width: 60 mm to 305 mm / 60 mm to 381 mm, special up to 420 mm
Blade length: from 4200 mm
Processing time: Saw blade 206 mm x 10 m approx. 30 min
Leveling tolerance: 0.02 mm - 0.03 mm
Tension tolerance: 0.02 mm compared to the calculated tension curve or the stored optimum curves
Tension: all desired tension profiles adjustable
Control: PLC control
Dimensions:
Length without deflection: 2200 mm
Height: 1540 mm
Width: 1115 mm
Working height: 1110 mm
Weight: 1120 kg
The machine can be inspected on site!
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Tài liệu
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2017
Gửi yêu cầu
Điện thoại & Fax
+43 5572 ... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


