OMC PL 90s

OMC PL 90s

This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine.

Machine Benefits

Technical Machine Benefits


• Plate size: 3000 x 1300 mm

• Stroke type: upward stroke (from bottom to top)

• Plate type: elkom electronic plates

• Press force: 90 tons on 80% of the surface

• Press cylinder: 6 x Ø 70 mm

• Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface

• Loading and unloading side: 3000 mm

• Heating system: electronic 25. 4 kw, maximum temperature of 120°c

• Automatic opening with timer

Extra Information

Hydraulic System
Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts.
Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min).
2 HP Electric Motor
Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve.
Control Panel and Electrical System
2 Temperature regulators for setting the plate temperature
Pressure gauge for pressure regulation with automatic pressure equalization system
General on/off switch
Two manual safety buttons for closing the press
Timer for automatic opening
Switch to select manual or automatic opening of the platens after the work cycle
Off/on switch for upper and lower platen resistance
Safety Systems
Timed bimanual control for closing the press
Safety rope on all four sides of the press
Ijdpjyalmbjfx Aazjht
Platen lock for maintenance
Protective guards for the pinion and rack units
Safety stickers and warning notices
Operating and maintenance manual
Complies with CE standards
Press Structure
Made of composite and welded steel
Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates.
Elkom Heating Plate
Electric plates with electric resistors
Consist of a chipboard with an aluminum sheet mounting electric resistors
Maximum Working Temperature: 120°C
Maximum Thrust: 7 kg/cm²