Lò Nabertherm L 08/14Nabertherm
L 08/14
Lò Nabertherm L 08/14
Nabertherm
L 08/14
giá cố định chưa bao gồm thuế GTGT
3.500 €
Tình trạng
Đã qua sử dụng
Vị trí
Żychlin 

Hình ảnh cho thấy
Hiển thị bản đồ
Thông tin về máy móc
- Tên máy:
- Lò Nabertherm L 08/14
- Nhà sản xuất:
- Nabertherm
- Mô hình:
- L 08/14
- Tình trạng:
- rất tốt (đã qua sử dụng)
Giá & Vị trí
giá cố định chưa bao gồm thuế GTGT
3.500 €
- Vị trí:
- ul Narutowicza 44-10, 99-320 Żychlin, PL

Gọi điện
Chi tiết về đề nghị
- ID tin đăng:
- A20412300
- Cập nhật:
- lần cuối vào ngày 30.10.2025
Mô tả
Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller
Configuration: horizontal
Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower)
Chamber volume: 8 liters
Description:
• Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm
• External dimensions (W×H×D): approx. 61 × 140 × 71 cm
• Weight: approx. 100 kg
• Maximum power consumption: 3.3 kW
• Plug: 380 V CEE (three-phase, 16 A)
Scope of delivery: Furnace only, no additional accessories – see original photos
Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational.
Shipping: Freight forwarding or personal pickup
Additional information:
• Fast heat-up times (in test: approx. 30 minutes to 1000 °C)
• Labotherm, Tmax 1400 °C
• High-quality Al₂O₃ fiber insulation for rapid heating
• Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life)
• Heating from both sides
Psdpsxr S Rpofx Agzerc
• Low external casing temperature
• Integrated control system with electronic safety interlock
• Programmable control via C19 controller
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Configuration: horizontal
Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower)
Chamber volume: 8 liters
Description:
• Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm
• External dimensions (W×H×D): approx. 61 × 140 × 71 cm
• Weight: approx. 100 kg
• Maximum power consumption: 3.3 kW
• Plug: 380 V CEE (three-phase, 16 A)
Scope of delivery: Furnace only, no additional accessories – see original photos
Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational.
Shipping: Freight forwarding or personal pickup
Additional information:
• Fast heat-up times (in test: approx. 30 minutes to 1000 °C)
• Labotherm, Tmax 1400 °C
• High-quality Al₂O₃ fiber insulation for rapid heating
• Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life)
• Heating from both sides
Psdpsxr S Rpofx Agzerc
• Low external casing temperature
• Integrated control system with electronic safety interlock
• Programmable control via C19 controller
Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.
Nhà cung cấp
Lưu ý: Đăng ký miễn phí hoặc đăng nhập, để truy cập tất cả thông tin.
Đã đăng ký từ: 2019
Gửi yêu cầu
Điện thoại & Fax
+48 793 1... quảng cáo
Quảng cáo của bạn đã được xóa thành công
Đã xảy ra lỗi


















