Trung tâm tiện và phay cnc

MORI SEIKI NZ 2000 T2Y2

CNC FANUC MSX-701 / MAPPS IV

CAPACITY
Swing diameter over bed: mm 800
Swing diameter over cross slide: mm 800
Maximum turning diameter: mm 320
Standard turning diameter: mm 200
Maximum distance between the center: mm 1.130
Maximum turning length: mm 810
Maximum workpiece size: mm 300

TRAVELS
X axis turret 1 and 2: mm 210
Y axis turret 1 and 2: mm +65 / -45
Z axis turret 1 and 2: mm 810
B axis headstock 2: mm 920

MAIN SPINDLE
Maximum speed: rpm 5.000
Drive power (30 min / continuous operation): kW 25/22
Maximum bar diameter: mm 65
Spindle bore: mm 73
Spindle diameter in front bearing: mm 120
Spindle mount: JIS A2-6
C-axis resolution: degrees 0,001

SUB SPINDLE
Maximum speed: rpm 5.000
Drive power (30 min / continuous operation): kW 25/22
Maximum bar diameter: mm 65
Spindle bore: mm 73
Spindle diameter in front bearing: mm 120
Spindle mount: JIS A2-6
C-axis resolution: degrees 0,001

FEED DRIVES
Rapid traverse turret 1 X/Y/Z: m/min 30/20/50
Rapid traverse turret 2 X/Y/Z: m/min 30/20/50

Ncodpfowlvlgjx Apuer
TOOL TURRET
Number of turrets: 2
Number of tool stations per turret: 16
Shaft cross – section for turning tools: mm 20 x 20
Maximum shaft diameter for boring bars: mm 32
Turret switching time (1 station): s 0,18
Maximum speed of the driven tools: rpm 6.000
Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5

DIMENSIONS
Installation area with chip conveyor: mm 5.120 x 2.720
Net weight: kg 8.300

Macchina equipped with:
• High pressure cooling system
• Bar loader interface
• Gantry-type piece unloading arm
• Cutting effort management system and load monitor
• No. 1 double radial motorized tool holder
• No. 3 axial motorized tool holders
• No. 2 external tool holders
• No. 2 double boring bar holders
• No. 2 single radial motorized tool holders
• No. 2 internal boring bar holders
• No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210
• No. 1 set of jaws for each self-centering chuck
• Instruction manuals and CE declaration