Máy cưa góc MEP COBRA 352 SX EVO nhôm
MEP COBRA 352 SX EVO Aluminiumkreissäge

Tình trạng

Mới

Vị trí

Böblingen

Máy cưa góc MEP COBRA 352 SX EVO nhôm MEP COBRA 352 SX EVO Aluminiumkreissäge

Hiển thị bản đồ

Thông tin về máy móc

Tên máy:: Máy cưa góc MEP COBRA 352 SX EVO nhôm

Nhà sản xuất:: MEP

Mô hình:: COBRA 352 SX EVO Aluminiumkreissäge

Tình trạng:: mới

Giá & Vị trí

Vị trí:: Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland

Gọi điện

Chi tiết về đề nghị

ID tin đăng:: A2302522

Cập nhật:: lần cuối vào ngày 26.03.2025

Mô tả

MEP COBRA 352 SX evo [Semi-automatic]

Article number CB352SX
motor power 1,5/2,2 kW
belt opening 180 mm
belt dimensions 350x32x3,4
Weight 285 Kg
Speed 1700/3400 1/min.
Cutting surface 0° 120 / 105 / 180x70
Cutting surface 45° right 120 / 100 / 135x60
Cutting surface 45° left
Godpfxjchkv Is Agqjtt
Cutting surface 60° right
Cutting surface 60° left

Description
Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel.

Basic equipment:
-Machine for miter cuts from 45° right to 45° left.
-Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left.
-* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors.
-CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens.
-New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings.
-New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred.

Electrical equipment:
-New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal.
-Saw blade stroke programmable directly from the control panel, to adapt to the cutting material.
-Ball bearing mounted rotary table to ensure easy and accurate rotation.
-Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts.
-Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left.
-Swarf extractor with preparation for OPTIONAL extraction system.
-Automatic saw blade lubrication system, operating only at the start of the cut.
-Machine is supplied without saw blade.
-Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil.
-Tool and instruction manual with spare parts list.

For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.