Cưa

MEBA 320 G HSS

Semi-automatic sawing process with automatic clamping, sawing, and raising of the workpiece to preset height after the cut is finished
Stepless hydraulic cutting pressure and feed monitoring at the saw band press. Therefore, optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles.
Particularly suitable for universal application with different cross-sections, materials, and frequently changing miter cuts
The machine control complies with CE standard 89/289

Technical data:
round/flat
90° 325/500 x 300
45° 300/300 x 300
30° 200/200 x 200

Rapid feed lowering of the saw frame to the material edge by push button
Manual miter adjustment from 90° - 30°, infinitely variable on a scale
The miter pivot point is the intersection between the saw band and the fixed clamping jaw, resulting in no length change when adjusting the angle
Hydraulic full-stroke workpiece clamping - CETOP hydraulic system
At every saw frame angle, the material is clamped parallel at 90°
Complete coolant device with electric immersion pump
Central machine operation
Saw band drive with end stop
Fgedehppabjpfx Aczeh
Movable band guide arm, adjustable to material width
Saw band deflection roller with carbide guide
Chip cleaning brush, rotating
Saw band tensioning with torque wrench
Painting silver-grey/blue-grey (RAL 7001/RAL 7031)
Remnant length: 25mm
Cutting speed:
AC frequency-controlled drive 15-150 m/min continuously adjustable at the control panel
Drive
Saw band 3.0 kW; 400V, 50Hz
Hydraulics 1.1 kW
Coolant pump 0.1 kW
Saw frame feed:
Continuously up to 300mm/min, hydraulically controlled
Saw band tension: Mechanically with torque wrench
Saw band dimensions: 4200x34x1.1mm
Working height: 750mm (without base elements)

Weight: 850kg
Dimensions (LxWxH): 1300x2050x1400mm

The following options are available:
Laser light
Micro-spraying device
Clamping pressure regulator
Support table on the feed side

Tin đăng này được dịch tự động. Có thể có lỗi dịch thuật.